430 install on a 68 Skylark - Help needed

Dropping in a 430 from a 69 riviera - Installed the frame mounts from TA Performance as well. Have the motor dropped in, lined up with tranny but am about 4" off on the mounts. They are no where close to lining up with the frame mounts. Any thoughts? Does anyone know (for certain) if the motor mounts can install in 2 positions on the 430? or am i missing something else all together?

 

:Comp: 1 post closer to being able to post the pic of my problem

 

:blast: 1 post closer to being able to post the pic of my problem

 

:moonu: this is gay - 1 post closer to being able to post the pic of my problem

 

:boring: 1 post closer to being able to post the pic of my problem

 

:spank: 1 post closer to being able to post the pic of my problem

 

:Smarty: oooooh im about to graduate to being able to post pics -

 

finally - pics of my issue

 

To which set of holes on the block did you attach the mounts?

Devon

 

The motor mounts were cherry when removed from the riviera - so I didnt pull them off at all. They are in the stock location for a 69 Riviera. Are there 2 sets of mounting holes?

 

You do have the rear sump oil pan in correct? Is the tranny gettin in the way?

 

Yes...better take a second look, and check that you're not still using the Riv oil pan.

Devon

 

I changed the pan and pick up tube to rear sump already. I tried to search for pics on line of a 430-455 motor. I it looks like there are 4 holes for motor mounts - which would mean 3 possible positions - is this right?

 

http://www.v8buick.com/showthread.php?t=111254

Devon

 

Thanks for the link Devon. Got it in there today!

 

:TU:

Devon

 

admin correction

(ignore this post)