462 shortblock, 71 cast intake, 71 stock rotating assembly

all that I have left.

0 mile 462 shortblock. Block is 75 block bored 0.030 and honed for the hastings rings. Decked .020 and line bore checked. Crank std matched with bearings. Speed pro pistons hung on factory resized rods with new bolts. 750 or best offer.

timing cover assembly, some wear in oil pump gear area but held 50psi with plate at idle. 150.00

stock crank hot tanked. Needs turned. 100.00

stock pistons w/rods out of low mile engine. Came out of electra with 39,000 that was totaled. 150.00

3 balancers. All good and timing marks not moved. 2 painted, 1 original paint, 50.00 each.

2 flexplates. 25.00 each

i can get shipping quotes for fedex under my account, which has so far turned out 40-50% cheaper than normal shipping cost
pm me your zip or email address for pictures additional info and i will get back with you this weekend.

Thanks Ryan

 

Interested in the crank, shipping to 78253.

 

Will let you know later today. Have a few things to ship so i will weigh it while i am there

 

intrested in the 462 what compression? who did the work?

 

Ryan,
The title mentions a 71 cast intake but there are no details in the thread. What is the date code?
Troy

 

Fidlers Machine in Topeka. Have paperwork. Compression should be 9.5 to 9.7-1 depending on head gasket.

I will have to check on intake but i am sure its a G-1.

if you pm me your email addresses i can send pictures. I cant figure out how to load pictures from my iphone/ipad. Says wrong file type no matter what i do

 

sorry im out but thank you

 

Is the short block assembled?

 

Yes short block is assembled

 

Thanks Ryan, I am out as I am looking for an A or early B 71 intake for my 02C car.
Troy

 

In line for short block

 

Crank is sold and shipped

 

More questions the cam I guess is not installed since you didn't state what cam was installed. Are the cam bearings the TA ones? I'm still interested

 

All bearings are clevite bearings, no cam or timing set.

 

Ok just let me know, your first in line for short block. If you PM me your email i can send pictures

 

interested in shortblock if it gets this far.

 

It it to me on the short block?

 

Its to you staged, then big joe and then 455 powered.

 

shipping to 63116 I have a business it can go to

 

Ok i will find out for you tomorrow.