1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

494 stroker pistons

Discussion in 'Parts for sale' started by dan zepnick, May 25, 2015.

  1. dan zepnick

    dan zepnick Well-Known Member

    For sale:set of j & e stroker pistons.new only used for mockup.includes pins and locks.4.350 bore.used with 7 1/8 rod. $450.kit was purchased from ta performance years ago.i bought them off a board member and needed deeper valve reliefs.having trouble posting pic.pm me email and I'll send pic.
     
  2. 1972 Stage 1

    1972 Stage 1 Well-Known Member

    Hi Dan,

    I don't want to hijack your thread and thought it may help you sell these pistons easier. I have new set of Crower billet rods for a 494 stroker if someone needs them to go with your pistons (purchased from TA, still in boxes). If anyone is interested please send me a PM and don't post here in Dan's thread. I will gladly delete this post if you prefer Dan. :TU:

    http://www.v8buick.com/showthread.php?277702-455-Crower-Billet-Rods
     

    Attached Files:

  3. dan zepnick

    dan zepnick Well-Known Member

    no problem james.would be a smoking good deal for someone that wants to do a 494 motor.
     
  4. dan zepnick

    dan zepnick Well-Known Member

    I no someone going to Norwalk next weekend.might be able to save shipping?
     
  5. dan zepnick

    dan zepnick Well-Known Member

  6. Buickrat1

    Buickrat1 Well-Known Member

    What is the pin height of these pistons?
     
  7. dan zepnick

    dan zepnick Well-Known Member

    Compression height is 1.320.
     
  8. dan zepnick

    dan zepnick Well-Known Member

    TTT.
    or James maybe you should buy these.add a crank and your all set,LOL.
     
  9. 1972 Stage 1

    1972 Stage 1 Well-Known Member

    Sorry Dan, but since you bought the girdled block I'll need that too. Maybe you need to buy the rods from me and then all you really need is the crank! :TU:
     
  10. dan zepnick

    dan zepnick Well-Known Member

    Sorry james.i already have a crank installed in that block waiting for the new pistons to get installed.lol
     
  11. dan zepnick

    dan zepnick Well-Known Member

    My mistake.the compression height is 1.350.my new ones are 1.320.still for sale.
     
  12. 1972 Stage 1

    1972 Stage 1 Well-Known Member

    Dan,

    I gave your phone number to a friend who is thinking about building a 494. He may purchase your pistons and my rods if he decides to build one.
     
  13. dan zepnick

    dan zepnick Well-Known Member

  14. GSMuscle

    GSMuscle Well-Known Member

    Do you have the dish volume with the valve reliefs?
     
  15. dan zepnick

    dan zepnick Well-Known Member

    I do not.but call Mike at ta performance. They are the standard valve reliefs. No dish , flat tops.
     
  16. Buickrat1

    Buickrat1 Well-Known Member

    Trying to send you a PM but your mail box is full.
     
  17. dan zepnick

    dan zepnick Well-Known Member

    cleaned out.send away..sorry.
     
  18. dan zepnick

    dan zepnick Well-Known Member

  19. Buickrat1

    Buickrat1 Well-Known Member

    Please send pictures to gsxstg2@aol.com
     
  20. dan zepnick

    dan zepnick Well-Known Member

    Pics sent.
     

Share This Page