'64 Special 2dr Sedan @ PA upullit

Heads up southeast PA,DE and MD people. I saw a decent '64 Special 2dr post at a Honeybrook PA junkyard the other day. It is at Ford's U Pull it on Rt 10 just south of Honeybrook. This place, for some reason , is only open on Saturday and prices are low.

 

Well that's just a little too far for me to drive to get the side moldings off of it!

 

any chance your gonna be up there again to pull some parts?...
sc300turbo@aol.com
Jeff

 

I'll try to go there next weekend and get pictures for anyone interested! Anything in particular that anyone needs?

 

I would be interested in the thin side moldings and the clips. The fenders are the hardest to remove due to the clips. You can see them from the back side.

Alsopark lights and buckets with he pigtails, and if the car has the door and quarter aluminum post moldings and belt moldings that go around the door and window frame.

The door and quarter panel interior trim panels if decent.

If you go there let me know. I can pm you my phone number.

 

Brian,

PM me your phone number. I wasn't able to make it up there yesterday due to work, but next Saturday I should be able to for sure, it's only 10 minutes away from me. I'll be sure to bring a camera with me too.:TU:

 

Thanks, PMed you my phone number.

 

Didn't have a chance to get up there today, but I will for sure this week. Sorry for the delay for anyone who is looking for parts off this car....I just got done school this past week.

 

Going to look at the car now...will report back with photos!

 

Car looks fairly solid, they said it ran when they got it in, but junked it because they did not have a title to it. I grabbed the steering wheel off of it. If anyone needs it let me know. Also no side body trim, but the trim around the windows appeared to be in good shape. Also all of the glass is in the car. The fan shroud for the engine was in excellent condition as well. Let me know if you guys need anything, I can go back up there.

Turn signals and lights were in good shape too. Grill looks really nice as well!

 

I'm interested . How much for the steering wheel? Is it all cracked up?

I would be interested in the:

park lamp assemblies
Radio panel/bezel (if not too badly pitted)
Rear window trim and also inner platic window trim if it still exists.

Also the cross braces that go in front of the radiator.

 

If no one has spoken for the fan shroud, I need one for my '64 Skylark, 300. Also, what kind of shape was the chrome Buick trunk emblem, in the middle, between the tailights? Am looking for one of those also. Thanks,

 

That car looks to be a 6 cyl and the shroud won't work for a 300 CI.

 

UPDATE: I have this car now

Forward any questions you might have about this car to me, I got it from Ford's yesterday.

 

Re: UPDATE: I have this car now

Cool ! Hope they gave you a good deal on it.