1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

66 Gran Sport parts needed

Discussion in 'Parts wanted' started by Horsman, Jun 9, 2018.

  1. Horsman

    Horsman Well-Known Member

    Set of correct 14 inch rallye wheels - Found
    Both rear wheel opening moldings - Found
    Factory air cleaner assembly - Found
    Coil bracket
    Fuel filter bracket(s)
    Distributor assembly - Found
    Nice black dash pad

    Thanks in advance!
     
    Last edited: Dec 1, 2020
  2. gs66

    gs66 Silver Level contributor

    I have an air cleaner, not sure if it’s 65 or 66, maybe they’re the same? It’s a black one, not chrome.
     
  3. gs66

    gs66 Silver Level contributor

    I probably have a distributor too, will have to find them.
     
  4. Horsman

    Horsman Well-Known Member

    Sounds good Jim, please let me know what you come up with. Thank you.
     
  5. 66kooch

    66kooch Well-Known Member

    Jeff, I will send you the coil bracket N/C
     
  6. Horsman

    Horsman Well-Known Member

    Thank you John.
     
  7. GS Spoken Here

    GS Spoken Here Well-Known Member

    Have a full set of wheel well chrome, not sure I want to brake the set, May have an AFB air cleaner, thanks Bill.
     
  8. Horsman

    Horsman Well-Known Member

    Please let me know if you want to separate, interested in the air cleaner if in good condition and correct for the 66 GS.

    Thanks!
     
  9. SpecialWagon65

    SpecialWagon65 Ted Nagel

    Hi Jeff- Did you get a Distributor yet? I recommend getting one rebuilt @ Everyday Performance...I can send him a core if you want.
    Ted
     
  10. Horsman

    Horsman Well-Known Member

    Ted, I would consider that. Does Ken do the electronic ignition conversion that is stock appearing? I know Todd Miller was doing this service while doing the restoration process.
     
  11. 36racin

    36racin Platinum Level Contributor

    Jeff have an interested party coming look at the 66 GS this evening or tomorrow. I may know something on the parts you asked about by the end of weekend.
     
  12. Horsman

    Horsman Well-Known Member

    Thanks Todd.
     
  13. ToddsGS

    ToddsGS Founders Club Member

    I have these kits in stock if anyone is interested.

    Stock Appearing. and THEY WORK!!!!

    BuickElectronicConversion.jpg


    70Dist.jpg


    BuickElectronicIgnitionKit.jpg
     
  14. Horsman

    Horsman Well-Known Member

    Todd, when I find the correct distributor for the car I was planning on sending it your way. Thanks!
     
    ToddsGS and SpecialWagon65 like this.
  15. SpecialWagon65

    SpecialWagon65 Ted Nagel

    Jeff, I think the Nailhead Distributors were identified by a metal tag around the shaft. Most of the tags are gone.
    I've got many cores if you want to send Todd a "generic" NH dizzy. Ted
     
    dl7265 likes this.
  16. dual-quadism

    dual-quadism Black on Black

    If you need a proper Nailhead dist core, I have a couple of the "055" 64-66 single 4brl cores. Let me know
     
  17. GS Spoken Here

    GS Spoken Here Well-Known Member

    Jeff, if you have not found the rear wheel well chrome, I will sell just the rear set. I will look at the air cleaner and make sure it is 66, for a AFB. Thanks Bill.
     
  18. GS Spoken Here

    GS Spoken Here Well-Known Member

    Found the air cleaner, very nice one, AFB, 66, air inlet points to pass side, let me know if you are still in need of these, thanks Bill.
     
  19. Horsman

    Horsman Well-Known Member

    Ted, sounds good, let me know if you want to send it directly to me or to Todd direct so he can restore it and do the conversion. Send me a PM with what you need from me regarding payment. Thanks!
     
  20. Horsman

    Horsman Well-Known Member

    Bill, I would like the air cleaner and rear wheel mouldings if nice and correct for my 66 GS. I am unfamiliar with these cleaners so I am depending on you to make sure its correct. Please send me a PM with payment instructions, items will be shipped to 75093. Thanks!
     

Share This Page