1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

67 rubber Radiator Insulators

Discussion in 'Repro Parts' started by flippermtc, Nov 18, 2014.

  1. flippermtc

    flippermtc Valley Forge Pa- Go Phillies!

    Guys,
    Can you advise where I can order the rubber insulators for GS 400 rad? I see 65-66 listed & 68-72 listed in the various mags. but nothing for 67. Thanks.
     
  2. priariecanary

    priariecanary Stacey

    I have looked and not been able to find any available anywhere. I don't think they are reproduced.
     
  3. mrolds69

    mrolds69 "The Cure"

    They are not repro'ed. There should be a number on them...1378523...maybe. Let me know the number and I can tell you what else they were used on. Went through this with my 67, I think mine came off a 69 Wildcat. Some Rivs used them, also.
     
  4. 79BlueShark

    79BlueShark Well-Known Member

    Are you looking for the top/bottom or all? I have seen two kinds on the 67's. Most popular ones have the rubber teats that hold them to the brackets and top plate are straight up and down. I do have set of the other that the teats are at an angle and have the corresponding brackets and top plate. Let me see if I can find them and take pictures. Not sure I would want to part with the NOS ones but I maybe be swayed if the money is right.
     
  5. flippermtc

    flippermtc Valley Forge Pa- Go Phillies!

    Guys,
    Im looking for top & bottom. The bottom have the tit that goes straight down & thru the mounting bracket. In a earlier post a member mentions this part number D-50-13 785 23
     
  6. flippermtc

    flippermtc Valley Forge Pa- Go Phillies!

Share This Page