I thought it would also be good if converting a 68 and using a turbo 350 or 400 istead of the super turbine with the 3 speed indicator.This is a console is in good over all condition without cracks or chips,courtesy light is nice,lid and compartment are nice,the indicator plate and brushed facia area have afew pits and scratches but are still pretty good.The shifter is complete with neutral saftey switch and a chunk of wiring(I did not cut it, cause that was just stupid) the shifter upright is cracked(see picture),it still works but needs to be fixed/weldedo No: it has good complete cable(no tranny pan bracket,but they are reproed) .The floor brackets and console mounting brackets are all there and I can trim them as much as the buyer would like to save shipping weight or allow to be used for templates.The colunm is a non tilt console style out of a 68,the first few threads are stripped clean but the steering wheel mounts just fine,not really an issue but none the less still there.$425 for everything + shipping or each piece seperately- $300 for the console & shifter,$40 for the cable,$60 for all the brackets and $55 for the column.I will give first consideration to a complete package buyer.I just need your home State or Provincial postal code to get a shipping quote
Cole. I will take the cable and column if you don't sell as a package. Let me know and I can send a check. Steve.
