68-72 Buick 350-V8 7-Blade Clutch Fan -Nice GM

Discussion in 'Parts for sale' started by mrskylark71, Jan 10, 2023.

  1. mrskylark71

    mrskylark71 Well-Known Member

    68 69 70 71 72 (will also fit other years) Buick 350 V8 7-blade clutch fan. Real GM parts.
    Approximately 18" in diameter. Standard issue on A/C cars, but will work with non AC applications to instantly improve cooling. Will also bolt on and work for 400/455 motors
    No rust-- Good clean used condition-- - $95 plus shipping from CT 06410.

    GM quality and fit
    203-651-9990 or email ros6872@hotmail.com or PM

    I have lots of nice Buick stuff-- contact me with needs
    www.ros6872parts.com
    I can accept Paypal, credit card via phone, check or money order--
    Thanks for looking!
    100_5081.jpg
     
    Last edited: May 15, 2023
  2. clutchracer

    clutchracer Well-Known Member

    Did this ever sell? May have interest.
    Thanks, Dave
     
  3. knucklebusted

    knucklebusted Well-Known Member

    How freely? They don't have much resistance until they have something like 170° hitting the thermostatic spring on the front. Hit it with a heat gun or even a good blow dryer to see if it tightens up.
     
    J. Jaeger likes this.
  4. mrskylark71

    mrskylark71 Well-Known Member

    Still available
     
  5. ToddsGS

    ToddsGS Founders Club Member

    I just spoke to a guy that needs this so back to the top so he can find it! :)
     
    Dano likes this.
  6. angelorayhurst

    angelorayhurst Well-Known Member

    Will this fit a 67 Skylark that had the 300 swapped to a 350 with the original 300 fan shroud?
     
  7. mrskylark71

    mrskylark71 Well-Known Member

    Not sure but the diamneter is approx 18" overall
     
  8. APVGS

    APVGS Ottawa Go Fast Guy!!

    Hi there. Do you have that 7 blade fan?
     
  9. mrskylark71

    mrskylark71 Well-Known Member

    sorry--no
     

Share This Page