Are the lines on a 68 the same as a 69? I started working on fixing the rust on the very end or the quarter panel today (I know, I should have had this done months ago ou: ) I started stipping it down to see where I was going to cut mine out to fit the "new" piece in. I noticed the top line, just below where the panel starts down was filled in with bondo. Probably 1/8 inch or more of bondo filling in the body line. They had made it just smooth up the panel to the top. I looked at the replacement piece I have, and it had the line on it too. But that piece is from a 69, not a 68. I know the lights are different, just didn't know about the actual body lines. Hopefully I didn't confuse everyone. I didn't have the camera with me or i would have taken some pictures. Thanks, Dan :3gears:
