1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

68 Skylark GS Body Parts in Connecticut

Discussion in 'Parts for sale' started by mrskylark71, Dec 16, 2018.

  1. mrskylark71

    mrskylark71 Well-Known Member

    Real GM 1968 Skylark GS Body Parts-- LH fender-- a little rust at the bottom. Inner brace is mostly there-- $150
    Left and right doors-- very good-- $300/pair. Picked up in CT 06451

    203-272-7103 or email ros6872@hotmail.com
    Have lots of 68-69 parts--www.ros6872parts.com
     

    Attached Files:

    1967 Big Buick likes this.
  2. babyblue 69

    babyblue 69 Well-Known Member

    Do you have any driver fenders for a 69?
     
  3. mrskylark71

    mrskylark71 Well-Known Member

    I have the 68 one pictured.
     
  4. babyblue 69

    babyblue 69 Well-Known Member

    Price shipped to 85204
     
  5. babyblue 69

    babyblue 69 Well-Known Member

    Is this still for sale?
     
  6. mrskylark71

    mrskylark71 Well-Known Member

    Which? Doors, fender-- yes-- but I cannot ship these
     
  7. gsjo

    gsjo Platinum Level Contributor

    Any rear 69 bumpers?
     
  8. mrskylark71

    mrskylark71 Well-Known Member

    Sorry-- no
     
  9. mrskylark71

    mrskylark71 Well-Known Member

  10. hdjohnk

    hdjohnk Member

    Hi.Looking for radiator support,driver side front inner fender,rear wheel well moulding. let me know if you can help me.thanks
     
  11. mrskylark71

    mrskylark71 Well-Known Member

    I have a beautiful LH rear wheel molding
     
  12. hdjohnk

    hdjohnk Member

    Hey,how much for the mounding? Would really like a pair. Would you know where I could also find window felts for 68 GS?
     
  13. newmexguy

    newmexguy Well-Known Member

    All '68 GM A cars should use the same window felts. Post car ones may be more difficult to source.
     
  14. mrskylark71

    mrskylark71 Well-Known Member

  15. pbr400

    pbr400 68GS400

    Window felts are the same for most ‘68 A bodies unless your GS has the wide door top bright trim. There’s a thread on here somewhere about it and a rebuilder. I’ll look for it.
    Patrick
     
  16. pbr400

    pbr400 68GS400

  17. mrskylark71

    mrskylark71 Well-Known Member

  18. mrskylark71

    mrskylark71 Well-Known Member

  19. mrskylark71

    mrskylark71 Well-Known Member

  20. mrskylark71

    mrskylark71 Well-Known Member

Share This Page