2” , 2.5”, and 3” height, gray, correct shape. There was several threads on this: http://www.v8buick.com/showthread.php?300367-69-71-GS-foam-seal-question http://www.v8buick.com/showthread.p...ed-to-the-69-71-GS-foam-seals&highlight=seals Price: $21 a set plus the ride to the lower 48 Kept it as low as I could. The increase is the exact amount of the foam cost increase over last time. Shipping: $4.00 for 1 set $5.00 for 2 sets $6.50 for 3 or more If anybody wants to hoard seals, for 6 or more sets, I will cover the shipping to the 48. All the same or vary the heights Have 75 sets to sell per height. This should last for a while, but will probably be the last of them. If you interested PM me if you want to send a check Paypal address: ramairbri@yahoo.com Please make sure you tell me how many, what height, and your screen name. Thanks Brian Steinbrick
Am going to try but no time, estimate or cost. Mike Vogel let me borrow his NOS one but we can not create the seals side angles on a fixed head cutter. Basically in discussion with a few companies that may do it for me. Will post if there is any news - Brian
guys, these seals are really nice. I bought a set.. not sure how they line up with nos., but the quality is great, and the fit to the air cleaner is excellent!
I will take two sets of the 2.5". Shipping to 60403-1828. Paypal payment and address sent. Thank you, John
I will take two sets 2.5". Shipping to 91040. Thanks for doing this project sir. :TU: Nick White. Pay pal coming.:bglasses:
I'm in for one of the 2", three sets of the 2.5" and two sets of the 3". Six sets total. Paypal on its way.
Here is how it was explained to me and what I have measured. Originally 455 cars were 2.5 and 350 cars were 3 (or close to it as all the foam that I have seen has some variation including these) For some reason, the parts counter seals from Buick were all 3 after some point in the mid/late seventies no matter what part number was purchased. The 2 was never used from the factory. Made them originally for someone who had a raised carb and did not want to cut down the foam. Had multiple requests for more so they were made just for that reason. Brian