1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

69 GS Convertible Rear Outer Fender Wells

Discussion in 'Repro Parts' started by ribuick, Aug 29, 2020.

  1. ribuick

    ribuick Well-Known Member

    Hello All, Can anyone help with finding a left rear outer fender well and trunk drop off/ extension. This is tough owning the bastard of the GM line. I have purchased the from AMD for a Chevelle for the time being. They will take alot of cutting to make work. Thanks in advance.
     
  2. Daves69

    Daves69 Too many cars too work on

    Good luck. Any 69 skylark outers will work even 4 doors.
     
    ribuick and Dano like this.
  3. Dano

    Dano Platinum Level Contributor

    I have a comple rust-free '69 trunk floor listed in the parts for sale section and the drops are almost perfect. I see you're in RI. I'm hoping to take a trip north this fall & could bring it.
     
  4. ribuick

    ribuick Well-Known Member

    Thanks Dano, I have completed the trunk floor so for and the main cabin floor. The drop off i may be interested in. I am wait to hear from the body guy , if the wheel well is doable, if may have to be, I cant find them anywhere. What would you want for the drop-off and when do you think your traveling?
     
  5. Dano

    Dano Platinum Level Contributor

    I probably wouldn't want to cut it apart. I think i had the whole thing listed for $325 but I'm open to an offer. I'm trying to get up there before the weather turns bad so w/in 3 mos. @ the latest. Could be sooner.
     
  6. ribuick

    ribuick Well-Known Member

    I just saw your poet with the trunk floor. I see what you meant, nice complete unit. It looks like i will be in for alot of measuring and little cuts to get these chevelle items to work. I have basically losst jut a bit more than the lip on mine. I have been lucky so far, having to do just a trunk and because of the pinholes the cabin floor. The rest of the car is fine. Just a full freshen up. Thank you , if you cut the floor , let me know.
     
    Dano likes this.

Share This Page