$499 package, or individually - short block, heads, plus brackets and other "stuff" $499 package price, or now priced individually as below (added a full set of new Stage 1 stainless steel valves, spring, etc., AND some free stuff). You may be asking yourself: "Has he lost his mind?" Maybe. "Is there something terribly wrong with these parts?" No! "Then what is wrong?" Just tryin' to clean house! "These have been for sale for a while, there must be an issue." Nope, no-one, and I mean NO ONE has expressed any interest in the whole package. So don't think that many have looked at it and backed away. I made a slammin' deal and bought a trailer load of Big Block parts from a guy here on the V8board about a year ago (you can look it up in the For Sale section) and I have been selling parts from it since. This is what I have left and I broke even long ago, so anything I am selling is pure profit now. I don't want to just give it away, and I don't need to ask fair market value either, so that's why this stuff is priced low. It's funny, when you price things low, people (me included) automatically think there's something wrong. ’73 short block, 0.030 with cast pistons. Low miles, but prior owner should have gone 0.038 to remove cylinder wall imperfections. Includes new 750lb engine stand - ($150 engine stand, plus block, and crank are worth that, no??). Not pictured - brand-spankin' new set of big block Buick Stage 1 stainless steel valves, springs, retainers, and locks ($250 on another ad here in V8Buick, new value is about $450!) 3 pairs of 455 heads, from left to right: ’73 heads, complete, take offs from running engine ($80 dirty, just clean-up and run!) ’72 heads, bare ($50 - want lower compression? Use these heads! Add valve package above for a nice deal) ’73 heads, bare, partially ported ($75 lots of work in these already, just needs some hours to finish them off; would go well with some Stage 1 valves!) New 400/430/455 cam -Erson Part # TQ20H - shows 214/214, 111 LSA, 0.478” lift (w/1.6:1) ($50 - Not much else to say here!) The following are exactly $0 - FREE! - First-dibs to whoever wants it that buys something from above: -Brand new cam - 195/225 cam, specifics unknown, but a lower lift mild cam -2 HEI V8 caps, both with coils -3 oil slingers -Harmonic balancer -3 pulleys -2 thermostat housings -7 various accessory brackets (AC, alternator, power steering) -3 new rod bearings -2 heat shields (starter, wire harness)
Archie, if you're still interested in the stock cover with oil pump cover, how's $75? I'll pay shipping to the lower 48. PayPal is ok.
hi any broken bolts on manifolds.need all 3 pieces 2 manifolds and heat shield shipped to co. 80909 pay pal
Have all 3 pieces. All the bolt holes are open and unbroken; Educate me on stock manifolds - there is one blind hole on the pass side crossover that has either a stud on it or a broken bolt...is that truly a stud? It's clean, I can easily thread a nut on it and spin it down with 1 finger. Will have to check on shipping quote Saturday, if the above is ok with you.
