73 2 door buick centurion parting out

Discussion in 'Junkyard Jewels' started by 462 Chevelle, Nov 25, 2010.

  1. 462 Chevelle

    462 Chevelle 462 chevelle

    car is blue 2 door power windows power locks power seats have all original a c parts 455 from factory car is complete other than engine trans and engine frame pads and trunk lid is junk . im in western ok.
     
  2. Roadmaster49

    Roadmaster49 Well-Known Member

    It just depends on how much you are willing to ship. There is not a lot I need but I am always buying Centurion parts.

    First and foremost, I need the stainless wheel mouldings for my brown car. I would buy all 4 stainless wheel mouldings.

    If the interior vinyl is nice, I would buy that [door panels]

    I would like to purchase the seat tracks (power seat track) but I need to know - this sounds like a 40/60 seat?

    If the dash pad is good, I am stockpiling good dash pads. I am also looking for the accessories you mention BUT would need the wiring harnesses.

    All this involves removal, so if you are looking to just remove and send so called "easy" stuff then check and see what you are willing to send and let me know.

    I would purchase the grille, headlamp surrounds and need at least one FRONT turn signal (plastic) cover. Basically I would take the front and rear plastic (tail lamps/front turn signal)

    I would buy a complete cruise control set up but that would include wiring.

    To get all of this would require a lot of $$$ on my part so I might have to pick and choose so the ball is in your court to let me know what you have, what you are willing to pull and send. I live in Iowa. I don't think you are close enough to have me pick up.

    I don't really want to see anything crushed that might someday be useful. 5 or so Centurions/LeSabres have been found on this website in salvage yards that are now crushed this year alone.

    Always purchasing good road wheels. Always looking for the needle in a haystack POSI and rear sway bars.

    email me direct if you like -- abc.moran@netzero.net (Bryan) Also, if another member needs a specific part I need, then they can have it 1st but I would like a shot at what is left.
     
  3. Roadmaster49

    Roadmaster49 Well-Known Member

    Attached Files:

  4. tallytony1000

    tallytony1000 Silver Level contributor

    If the drivers door is in decent shape, how much?
     

Share This Page