I know that GM changed to the 8.5 rear end in the early 70's. Did the 71 or 72 Skylark come with one? Did it come with both c-clip and Ford type axle keepers?
71-2 Skylark and Cutlass have the 8.5". Rear u-joint is held in place w/straps and screws. 8.2" units use u-bolts w/nuts.
Bolt in axles on Buicks, Chevy had the C-clips. I believe there were some Canadian Skylarks with 12 bolts, that I heard were Chevy rears, but that needs to be confirmed or set straight. Mike
Are these press on bearing 8.5 rear ends the same as the c-clip type? From what I have read these 8.5 rear ends are strong, and there are plenty of aftermarket gears and stuff for them.
rear end hey i have got a 1970 lark with pressed in axels and no c clips, also it uses u bolts and nuts on the yoke. also my axels are way wider that the 8.2 reart end off of my 1970 chevelle. thrice
