800 q-jet how to hook up

Discussion in 'The Mixing shop.' started by mbruizer187, Apr 18, 2005.

  1. mbruizer187

    mbruizer187 Well-Known Member

    got a new streetmaster 800 stage 2 Q-jet and dont know how to hook it up there are like a million openiings for hoses and stuff and only 3 vacum and 1 fuel on my holley im confused at which to use :Do No:
    and there a treaded hole in the back in the middle on the bottom with nothin in it :Do No: heres a pick

    Thanks
    Rich
     

    Attached Files:

    mbruizer187, Apr 18, 2005
    #1
  2. 70gsrick

    70gsrick 1 of 66

    I used a banjo fitting at the fuel inlet and used the hole in the back to go to the pcv valve...I can take a couple of pics if that would help? Mine is a four speed so I'm not sure what might differ if you have an auto. :Do No:
     

    Attached Files:

    70gsrick, Apr 18, 2005
    #2
  3. mbruizer187

    mbruizer187 Well-Known Member

    ok thanks so block all the others and use the threaded hole in the back to the pc valve, and the some other 2 for vacums cool thanks.

    Thanks
    Rich :TU:
     
    mbruizer187, Apr 18, 2005
    #3
  4. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    The PCV valve port is on the front bottom plate.
     
    Smartin, Apr 18, 2005
    #4
  5. mbruizer187

    mbruizer187 Well-Known Member

    thanks Smartin then block the hole in the back.

    Rich
     
    mbruizer187, Apr 18, 2005
    #5
  6. mbruizer187

    mbruizer187 Well-Known Member

    what are all those othe inlets for :Do No:
     
    mbruizer187, Apr 18, 2005
    #6
  7. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    smog crap on later carbed engines..
     
    Smartin, Apr 18, 2005
    #7

Share This Page