I have some BBB Stokers parts that are in fantasitc shape. They are used, but have LESS then 10 passes on them. The parts are all located in St. Louis, MO. The Crank: It is a stock crank (4.140 Stroke, 2.000 Rod Pin, .010 Mains) It has been hand profied and debured to incrase strength and reduse windage. It has also been Military Spec Shot Peended. The Rods are Alum. GRP's, the job # is 26396, If you have any questions you could call them and they could fill you in, or let me know and I can contact them. The Pistons are Ross #107278, With a 60cc head they were 14.42 to one. If you have any questions let me know and I can give you way more detail. I figured I would not bother if no one was interested. I also have the ATI balancer that this was balanced with, but not the flex plate. If someone is interested would be willing to sell the balancer also. I would also be willing to have someone ship me there flex plate and I could have the assembly balanced for some extra money. We can figure out the details if someone is serious I am asking $2300 plus shipping not including the balancer or balancing. If you are interested send me a PM and we can work out the rest. Thanks for looking, Gary
The motor is externally balanced, I will get the pistons and rod info and post it in here and send you a PM on Monday. Thanks for looking, Gary
Pistons 4.375 Bore 1.266 Compression Height .043 1/16 3/16 ring package -4.5cc Dome Virtical Gas Ports .990 Pin Rods 7.200 Long .990 Pin Small Journal Chevy Big End ARP 2000 Rod Bolt Thanks for looking, Gary
