1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

Buick and Caddilac parts

Discussion in 'Parts for sale' started by freakzilla, May 15, 2013.

  1. freakzilla

    freakzilla Well-Known Member

    I have some Buick and Cadillac parts for sale:

    - 1970 Stage 1 455 SS block, not bored, clean $800

    - 1973 Cadillac 500 473 w 80K miles runs great $500

    - Blue front and rear seat, no tears for 70 Skylark $250 (bench)

    - 1970 skylark hood, clean, no rust $100

    - 1970 skylark dual exhaust $100

    - 1970 Buick 350, purrs like a kitten $400

    - 350 turbo, needs rebuilt $100

    Spence
    219-746-1670
     
  2. cstanley-gs

    cstanley-gs Silver Mist

    In line for a friend for the 70 stage block
     
  3. Rusty Davenport

    Rusty Davenport Silver Level contributor

    In line on block.What is the vin # thanks
     
  4. breakinbuick11

    breakinbuick11 Platinum Level Contributor

  5. cstanley-gs

    cstanley-gs Silver Mist

    Im out of line for the block
    Rusty - you're up!
     
  6. Rusty Davenport

    Rusty Davenport Silver Level contributor

    ok,do you have the vin number from the block?
     
  7. jtroop

    jtroop Well-Known Member

    Still trying to figure out what happened to my first request of date code of 70 Stage 1 block?....I was first to respond.
     
  8. freakzilla

    freakzilla Well-Known Member

    John, I'll get back with you today. I apologize guys, I had hernia surgery from a deployment and am just now back on my feet. Local soldier here at Ft Bliss.
     
  9. Rusty Davenport

    Rusty Davenport Silver Level contributor

    John,I wondering how you are saying you're first up when you had no replies to this thread till you claim you are first in line?
     
  10. cstanley-gs

    cstanley-gs Silver Mist

    There was another thread that was deleted... John posted first, I posted second.

    When removed, I found this one and posted first, but knew John was first on the other one.
     
  11. jtroop

    jtroop Well-Known Member

    Thanks Curtis
     
  12. breakinbuick11

    breakinbuick11 Platinum Level Contributor

    Still interested in the exhaust when you heal up. :beer
     
  13. Rusty Davenport

    Rusty Davenport Silver Level contributor

    Did you ever have a chance to get vin# for block?
     
  14. RATCHETMASTER

    RATCHETMASTER "I reckon so!"

    Is the bench seat the split bench with armrest? Possible interest if so.
     
  15. freakzilla

    freakzilla Well-Known Member

    Will have an answer on the block.numbers today. Rusty call me. Bench seat does not have arm rest.

    Spence
    2197461670
     

Share This Page