BUICK Odds and Ends $5-$10 ea

Locks are spoken for below.

 

Ok folks, below is my understanding of who has dibbs on what. Please find your name and confirm:

I will be packing and mailing Saturday for those who have paid.

John, there is one radiator cushion for a 4 row, the other three are 3 row. Do you still want the three row cushions?

Todd, you also asked for a set of radiator cushions. I need to understand if John has dibbs on those, and if not, are you needing 3 row cushions?

Rhett aand Lou, Let's clarify who wants which switches please.

Kerry -4 speed disc brake pedal pad and the clutch pedal pad

John- Bumper filler, pair of under dash courtesy lights, big block radiator cushions and two of the 90 degree brass manifold vacuum fittings

Scott-70 choke, ground strap and the air cleaner temp switch.

Todd- 5 of the headlight adjustment screws with plastic anchors, and the defrost plate. Also the 2 dome lights

Matt- The accy plate isspoken for, you have dibbs on the defrost fan switches and the 70 choke

Jim- no those are inner rear quarter plugs not core support hood bumpers near the little starter bracket.You have dibbs on the 2 new door lock gaskets.

Tom-a booster check valve. Kerry has dibbs on the disc brake pedal pad

Terry- the set of the quarter drain flaps (flat ones)

Lou-headlight rings and courtesy lights. And idle solenoids. I called them TCS switches in the ad.

Rhett- both of those TCS vacuum switches. My understanding is Lou wants the two electric idle solenoids and you want the two vacuum ports. I am confused with the referneces to TCS. Please confirm. You have dibbs on the locksets and the neutral safety switch but is is not from a tilt column.

Dennis, Rhett has dibbs on the locks but the Ignition switch is yours

 

John- Bumper filler, pair of under dash courtesy lights, big block radiator cushions and two of the 90 degree brass manifold vacuum fittings.

Thanks Marko PM'd ya also. Yes on the above list with the 3 row cushions and the one 4 row please. Have Pay Pal'd this morning but let me know if I owe ya more:TU:

 

confirmed paypal sent

 

Confirmed and PM sent...checks in the mail:dollar:

 

I'm in on the check valve. Payment instructions please.

 

Will take 8 headlight adjustment screws instead of 5, let me know if I owe you more on that. Need 4 row cushions only. Confirmed on everything else. Thanks Todd

 

Shipping today to:
John F

Todd

Tom

Lou

Nick

I am either waiting on parts confirmation, mailing addresses or $ for the other stuff. If you paid or sent me address and not on the list above let me know.

If you still want stuff and need to respond, please do.

If you have responded and I missed it, please let me know.

Cheers!

MarkO

 

Long shot but if either of theTCS switches are available, I will take one.
PN on the TCS switches are : DR1397424 & DR1114452

 

Lou snagged both of them...

 

Hi Marko,

I Pay Pal'd ya on March 2nd, if I missed it in all my other mail or still owe you anything just let me know.

Thanks,

John

 

Mark - waiting to hear on final shipped price for the two TCS switches and the locksets...PM me please

 

Mark,
Lemme know what you need for the two door lock gaskets ,also gonna need your address for payment. Ya think I would have saved it....PM incoming, Jim/Rott

 

Mark,
Assuming hinge pins/bushings are for Skylark hinges? If so I will take them as well. PM Incoming, Jim/Rott

 

Bottom left of the first photo, two retaining clips in a bag - are those for a hood release?

 

Are we good Marko? No sweat i know u are busy, just checkin

 

I mailed it today, should have Tuesday. Cheers!

 

Thank ya buddy,just wanted to be sure i paid u enuff:TU:

 

Mark. Everything arrived today ( Saturday ) . Next time don't use a " AMAZON BOX " . The wife had it ripped open before I even saw it. All " HER " stuff comes in Amazon boxes. There isn't a day goes by without one of those boxes arriving here . lol

Thanks. Lou

 

Yeah Lou, same here...:laugh: why do you think I have such a supply of those boxes?