Convertible Stuff

Not sure of the proper part name for some of this so let me know if you have any questions. All parts are driver quality. Let me know if you need more detailed pics.

Soft pillar molding pair - 20.00 one set is 68-69 hardtop other is 70-72 convertible
Quarter access panel single - 10.00
Upper windshield frame covers metal pair - 30.00 pr
Convertible top hook receiver set #7740912 and 13 - 40.00
Convertible wind shield with antenna lead - used - 100.00
Convertible top pump motor w/lines (has lifts too but one leaks) - worked when bench tested - SOLD
Convertible top pump motor - not working when tested - 20.00
Convertible sun visors - driver cond. - 20.00 set
Convertible rear view mirror trim w/visor clip - 10.00
Mirror trim w/visor clip - 10.00
Top motor harness - 40.00
Top switch harness - 20.00
Donor body section driver side - 40
Donor body section pass side - 40


Shipping not included

Chris

 

1 set of pillar molding is for a 68 69 hardtop the other set is 68-72 convertible.

 

So the 68-69 HT moldings were soft?

 

Interested in the pinchweld mldg and ss pillar mldgs. what condition are they? dings, dents?

 

which is the ss molding? I'll double check the pinch weld pieces for condition.

Chris

 

The stainless moldings that go on the outside along the windshield. I see one pr has a dent.

 

Pinch weld moldings need polishing and have usual light scratches etc. Straight and not dinged up. One piece has one mounting hole broken so I have one set good and one set with a single broken mounting hole.

 

Chris - I got a message your PM mailbox is full. I'll call you tomorrow. Mike

 

sorry bout that. PMs cleared

 

Interested in the best sets of pinchweld moldings and pillar moldings. Would like closeup pics sent to kashivnen@gmail.com
What would shipping be to zip 48331?

 

yes. they are the ones on the left side in the pic.

 

PM sent

 

Frank, youre up first. Yes one of the stainless exterior pillar moldings has two small dings, one a little bigger than the other. That would be one of the passenger side pieces. Pinchweld pieces, each piece has atleast a real small ding in each. Gotta hold it at different angle to really find them.

#1 Pass Side


#1 Driver Side


#2 Pass Side - one of the mounting tabs are broken on this one.


#2 Driver Side

 

http://s919.photobucket.com/user/usasquint/library/For%20Sale?sort=3&page=1

All of the part pics I post here before I list. If its pictured I have it still. Feel free to browse.

 

Right now I have Frank (MrOlds) for a pinchweld set and pending on the stainless pillar moldings.

Karen is next on remaining set of pinchwelds pending pic review.

 

Interested in the Non-ac kick panels/vents.

 

Goose, yeh have not listed those yet. 80.00 for the pair

 

Chris-Interested in a pair of good horns. Thanks

 

Still need to hook'em up and make sure they honk

 

I be interested in those and the quarter panel access covers...can i pick them up tonight or sometime next week?