Complete disc brake setup- Brake booster was reman unit, master cylinder was reman, at least one brake caliper was reman, but I think both were. Brake pads are expensive ceramic pads, still have plenty of life. Original portioning valve. The parts that are reman I don't remember how old they are exactly, within the last 7 years. The car was in an accident, the brakes are fine except there is a piece of linkage that bolts to the spindle, and the tie rod bolts to the other end, it got bent. I bent it back close to original position. A little heat with a torch this can be bent back to where it should be, doesn't need to be exact because an alignment will correct it. it is also possible the piece from a drum brake car will swap, but i don't know. $125 PICKUP ONLY! I will be willing to meet halfway within reason.