Frame for 65-67 Skylark

Discussion in '"Pay It Forward"' started by ajjones44, Jun 29, 2008.

  1. ajjones44

    ajjones44 Well-Known Member

    I am looking for a frame that will fit a 67 Skylark that is in either MD, VA, or NC. Thanks.
     
  2. nekkidhillbilly

    nekkidhillbilly jeffreyrigged youtube channel owner

    well i got one that is unboxed in east ky but its not cleaned off yet still has the body on it and ive not switched my car over to its new frame
     
  3. ajjones44

    ajjones44 Well-Known Member

    Please keep me in mind when you are complete. Are you moving to a boxed frame? OEM or aftermarket?
     
  4. nekkidhillbilly

    nekkidhillbilly jeffreyrigged youtube channel owner

    oem i got give to me from shaggyfinisher on here

    mine has a place on the left front were it was damaged in a wreck also but it has been straightened and all it could use a little better welding on that one spot but it is a easy fix but is solid and has no rot or nothing

    how quick would you need one?
     
  5. Stubbe

    Stubbe Stubbe

    If ya don't mind, im going to piggyback. Theoretically what would a 65 special four door frame be worth, are 2 and 4 same frame, wt about wagons. There is one at a yard near me that I got told I could pull the body off at my school, and return it to the yard for 750, thats rolling, rear axel, spring, gastank, maybe engine and tranny( not running)
     
  6. ajjones44

    ajjones44 Well-Known Member

    I am in no rush right now.....plus I still waiting to see what is up with couple of other potential frames. You are my #1 on a non boxed frame though. Thanks.
     
  7. ajjones44

    ajjones44 Well-Known Member

    I have seen a few rollers for 450-600 or so without the drive train. Then you have evil bay sellers listing at 1500..... with no bids of course. I would 750 is not bad as long if you can sell the drive train.
     
  8. nekkidhillbilly

    nekkidhillbilly jeffreyrigged youtube channel owner

    i would need a little cash for mine

    100 bucks or so
     
  9. 197064buickspec

    197064buickspec 1964 Special Post-455

  10. Stubbe

    Stubbe Stubbe

    How bout a 65 chevelle frame? Does it fit?
     
  11. nekkidhillbilly

    nekkidhillbilly jeffreyrigged youtube channel owner

    shorter
     
  12. ajjones44

    ajjones44 Well-Known Member

    Anyone? TTT
     
  13. nekkidhillbilly

    nekkidhillbilly jeffreyrigged youtube channel owner

    still got mine
     
  14. ajjones44

    ajjones44 Well-Known Member

    I still have you in mind. I found on in MD which I travel too every weekend. Its not boxed either. However, if you should find yourself close to Interstate 95 anytime soon we can work out a deal.
     
  15. nekkidhillbilly

    nekkidhillbilly jeffreyrigged youtube channel owner

    i doubt i will be out that far but if your interested just let me know i throw in a 8.2 rear also
     
  16. buickdreamin

    buickdreamin I need a new old car ...

    Andre,

    I have one for sale here.

    It needs a little work, but its solid on the bottoms. Maybe a little far for you but let me know if you are interested.

    Pete
     

Share This Page