From the guy that gave you the MEGA SALE!Now brings you! Buick 350 parts for sale

My project just went into a hole new direction and i have a 350 Buick to part out.

So hurry Hurry HURRY! before its to late!

Poston S divider intake, which was cleaned in a parts washer so its practically brand new, also has heat stove on it
for the choke, 150.00 plus shipping. THIS ITEM IS SOLD!

TA 212 cam and lifters this is a hydraulic camshaft, 200.00 plus shipping

Used front timing cover, has old neoprene seal in it so it most likely wouldn't be hard to put a new one in, comes with ALL the bolts that bolt it to the block including the 2 oil pant bolts, I will be washing it this week in the parts washer so i will be clean. 100.00 plus shipping.

NOW! a word about the parts washer I am using, this is NOT the kind that uses acid to clean the parts, its more hot water and a kind of industrial soap, it is not harmful to human skin so do not worry at all about these parts.

This is a 71 engine so I have rods and pistons from them, 50.00 plus shipping, and that's for the rods and pistons together WHAT A DEAL!:Brow:

I also have an HEI distributor with accel cap and coil your for only 40.00 plus shipping

any questions just ask!

I live in mars PA and most of the parts are in butler However i have with me the intake cam/lifters and the front timing cover so i can get those shipped the fastest.

Paypal only unless I'm meeting you in person then cash only.

16046.

ONE MORE THING!!!

the cylinder heads i have from the engine have had some work done to them, magnafluxed,valve job. cleaned and TA stage1 springs on them. I also spent a total of 16 hours porting the heads, polishing the chambers and gasket matching the intake runners to the intake gasket. I should still have the receipt from the machine shop that did the work to.

Your for the simple price of 400.00 firm, plus shipping, I am willing to meet, if that helps people out.I can not guarantee any flow numbers just that they will flow better than stock, lol no one around me has a flow bench that i could pay for to use.

Once again if you have any questions just ask, I will have pictures up soon.

 

Interested in the intake, cam, and lifters could you estimate shipping to 59044?

 

Pictures!!!! I'll post some of the timing cover after it is cleaned.

 

Interested in the dist, shipping to 80031?

 

looks to be around 35.00 if its anymore I'll cover the rest. This is in parcel post from usps.

---------- Post added at 09:44 PM ---------- Previous post was at 09:38 PM ----------

It'll probably be around 12 dollars in parcel post from usps

I would not be able to ship the distributor till next week.

 

I'm interested in the cam n HEI. Shipping to 94538

 

Could you tell me what lifters they are? I have a 69 and worried they won't be correct.

Thank you

Dan

 

In line for heads. Please post pics.

Other than the springs, are the rest of the hardware circa 1971?

Have they been resurfaced?

Thanks

 

They are for 1970 and up.

---------- Post added at 12:17 PM ---------- Previous post was at 12:15 PM ----------

Yes they have the original valves, retainers, and valve locks.

Yes they were resurfaced and have new viton seals installed. I'll get some pictures up as soon as I can.

 

Please put me in line for the cam and the lifters. Thanks.

 

Great. Did the manifold require resurfacing to maintain proper alignment?

 

Thank you, I'm out for everything. Don't want to waste your time trying to figure out what i should do, and don't want to ask to split up the cam and lifters. Appreciate your quick responses and apologize for taking up your time.

 

I was told that they took very little off. Just enough. I never had it back together but were probubly talk maybe .001-.002

---------- Post added at 01:57 PM ---------- Previous post was at 01:39 PM ----------

the cam and lifters are still up for sale but there's still a guy before you inline about the HEI.
shipping the cam and lifters is going to be about 20.00 if its anymore ill cover it myself. Still interested?

 

More PICTURES!

 

Does the Poston intake require a special gasket. You mentioned you gasket matched the intake ports. Which gasket did you use?

I ask because I have both a Poston and Stock intake to use.

 

I matched it using a stock intake gasket. I don't think the aluminum intake requires a different gasket. If your interested I could throw in the original head bolts and intake bolts to free of charge.

 

I was only interested in just the cam no lifters because I have some Lifters already. How much for just the cam? I'm still interested in the HEI as well.
Thanks Joe

 

Inline on the intake. Let me know if it gets this far. Thanks

 

Your first in line now.

---------- Post added at 11:58 AM ---------- Previous post was at 11:57 AM ----------

150.00 for the cam plus the shipping.

 

PM sent