Does anyone have a set of big block valve springs that will hold up to a moderate cam? I don't know if my current springs will be good enough for the Lunati I'm going to install, and I'm too cheap to buy new...unless I absolutely have to. Also looking for a 2000-2300 stall convertor for my T400. Anyone? o No:
2000 2200 Adam I have a 2000 to 2200 range converter that I used for a year or so. It was in my th350 but I think it will interchange with the th400 :3gears: I moved to a 3000 rpm converter I will check my notes and verify the exact range. I will let you have it for $75 plus shipping Joe B Joeslark@stny.rr.com
Adam I have a set of 1.500" diam.springs that are 170# on the seat at 1.90" installed height. $60 +ship gary
I may hold off on the convertor for a bit Joe... I'll let you know if I want to go ahead with it though. THanks!
Valve Springs I have some valve springs that I am sure would work great for your application. I had a cam gear and distributor gear go out on my BBB 455 and so I got a larger cam with a kit, which included new valve springs. The springs I replaced only have about 6,000 miles on them. They are a dual valve spring and in great shape like new. (See attached pictures.) I would like $58.00 (Money Order) for them shipped to your door. Thanks; Mike
My old camshaft. It was a Schneider Racing "custom grind cam." I don't know much about it. It had a lope to it but not a lot. It was a good street cam. Shneider's phone is.... (619) 297-0227 Mon-Fri. 8:00 to 4:00. and the grind number is 284-94H with that number they can tell you whatever you want to know. It's not listed on there website. I have called before, but I misplaced the information they gave me. I think it had an intake and exhaust lift of .480" I'm not sure. I know it was in the upper .4..'s. I hope this helps you out. Mike
Ok, Sounds good to me. It may take a while for me to actually get a Money order, since I don't have a lot of time during to day to stop places. PM me your address.. Thanks!
