holley #80714 , 870 cfm , vac sec , e-choke

Discussion in 'Parts for sale' started by DEADMANSCURVE, Jan 13, 2022.

  1. DEADMANSCURVE

    DEADMANSCURVE my first word : truck

    shipping extra if needed .
    GM 502 crate motor carb . #19172226 , holley # 80714 . appears to be a combo of street avengers #83870 and 80870 - 2 corner idle but down leg boosters . new at summit racing those are almost $500.00 . i set it up using #83870 specs , the take out parts matched those and it didn't look like it had been apart .
    lookin' low miles - clean , complete and original looking . was told it was a "take off" - customer went EFI .
    disassembly and inspection , bath n flush , checked gasket surfaces etc , clear coat and bake on the body and bowls , reassembled . has power valve protection and the vac sec "quick lid" for easy spring changes . i mod'd the nozzle screw for a little better flow .
    quick 10 mile test run on my stockish 360 was good , drained n cleaned , bench tested the vac secondary - good .
    ------------------------------------
    needle n seats - .110
    fr jets - 78
    rr jets - 82
    power valves - fr 4.5 / rr 3.5
    pump nozzle - 42
    vac sec spring - plain ( i would maybe recommend a purple spring after test drive if needed)
    pump cam - green #290
    fr metering block - 11981
    rr metering block - 11697
    above all appear to be oem 83870 spec parts . not 100% sure on the pump cam .
    ------------------------------------
    floats and throttle blades set at oem spec
    idle screws set at 1.0 full turns out as a start up point
    5.5 - 6.5 lbs fuel pressure per holley tech
    i recommend non ethanol fuel and/or an additive like seafoam , stabil etc
    ------------------------------------
    please check pics and info carefully
    contact me if needed
    thanks for the look
    -----------------------------------
    $300.00
     

    Attached Files:

    Stage 2 iron likes this.
  2. DEADMANSCURVE

    DEADMANSCURVE my first word : truck

  3. DEADMANSCURVE

    DEADMANSCURVE my first word : truck

Share This Page