1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

Hood to Seal Plates . . . Brand New Product at Stage1Restoration.com !

Discussion in 'Parts for sale' started by ToddsGS, Jul 27, 2021.

  1. ToddsGS

    ToddsGS Founders Club Member

    These are for the 1970 & 1971 GS & GSX Models.

    These are Made in the United States.

    1972 versions
    are also available!


    Price is $209.00 for the Pair plus exact shipping to your address.


    Correct Mounting Hardware is also available (Search "Hood Insert Hardware" on my website)
    BuickGSHoodVentHardware.jpg



    These are not available anywhere else other than Stage1Restoration.com !
    Note: TPP does sell some and markets them for 1969 - 1972. They're only correct for the 1969 Models!!!!


    1.HoodSeals.jpg

    1.HoodSealsImg.jpg


    [​IMG]

    I accept Pay Pal and all major Credit Cards.

    Order by phone by calling (715) 874-6037
    Shop Hours Monday - Friday 1 pm to 6 pm Central time.


    Thanks for Looking,




    Best Fastener Collection in the country for 1970 - 1972 Buick GS, GSX & Skylark! And Made in the USA.


    [​IMG] [​IMG] [​IMG] [​IMG]


    [​IMG] [​IMG] [​IMG]



    Don't like dealing with the Big Name Retailers?
    Give me a shout. I'll be happy to help and share 30 + years of experience in Racing & Restoring Buick Muscle Cars.

    Check out my New Website for 100's of Buick GS, GSX & Skylark Restoration Parts!
    I now have an
    OEM Page as well with 100's of parts to be added as time permits!

    www.Stage1Restoration.com

    [​IMG]
     
    Last edited: Jul 22, 2024
    87GN_70GS, Ken Mild, #7 and 4 others like this.
  2. ToddsGS

    ToddsGS Founders Club Member

  3. Marcdbuilder

    Marcdbuilder Founders Club Member

    And 69's are still in R&D?
    Haha!
     
  4. ToddsGS

    ToddsGS Founders Club Member

    TPP reproduces the 1969 versions......
     
  5. ToddsGS

    ToddsGS Founders Club Member

  6. ToddsGS

    ToddsGS Founders Club Member

  7. 2.5

    2.5 Platinum Level Contributor

    Todd, because you are able to be in front of them, how close to gen are they?
     
  8. ToddsGS

    ToddsGS Founders Club Member

    Sorry, I'm not sure I understand the question . . .


    .
     
  9. Stage 2 iron

    Stage 2 iron Platinum Level Contributor

    I think he means how close to original GM parts they look like.
     
  10. 2.5

    2.5 Platinum Level Contributor

    Thank you, sorry for the confusion. I use that term in another hobby.
    How close to the original GM plates are they?
     
    Dano likes this.
  11. ToddsGS

    ToddsGS Founders Club Member


    We've had them on cars that were judged at MCACN and the Nationals and know body knew the difference. :)
     
  12. Ryans-GSX

    Ryans-GSX Have fun, life is short.

    Todd some of the early repop ones warped after they got hot under the hood. How are these comparing/holding up ?
     
  13. ToddsGS

    ToddsGS Founders Club Member

    Ryan, I haven't had anybody contact me on the ones I sell. I'm the only one that has the correct 1970 - 72 versions.

    There is another vendor selling some but not correct for 70 - 72. Who's plates are you referring to that warped? As mentioned earlier, nobody ever mentioned this to me with the ones I sell.
     
  14. 2.5

    2.5 Platinum Level Contributor

    Does the factory 70 look like the factory 71 and 72?
     
  15. Ryans-GSX

    Ryans-GSX Have fun, life is short.

    70 &71 look alike
    72 one side has more of a triangle hole in it.
     
  16. ToddsGS

    ToddsGS Founders Club Member

    I show both versions on my website if you want to see the difference, but as Ryan mentioned, the 72 version is slightly different on one side due to the addition of the air pump onn72 models.
     
  17. ToddsGS

    ToddsGS Founders Club Member

    .
    .


    Ryan, do you know who provided the ones that warped?

    .
    .
     

Share This Page