1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

Let's Trade Dash Woodgrain

Discussion in '"Pay It Forward"' started by gsgns4me, Jul 10, 2022.

  1. gsgns4me

    gsgns4me Well-Known Member

    I hope this is the right place for this. If not let me know.

    I damaged my brand new Mark Wajda woodgrain decal for my heater control.
    I would like to trade someone the extra decal Mark provided for an A/C car for your extra decal for a non-A/C car. Only interested in one of Mark Wajda decals. Thanks
     
    BUQUICK likes this.
  2. Brett Slater

    Brett Slater Super Moderator Staff Member

    Dwayne,

    I did the same thing with one of his decals and immediately reached out to him.

    For around $30 shipped, I had it in a couple days.
     
  3. gsgns4me

    gsgns4me Well-Known Member

    Thanks Brett. That's good info.
     
    Brett Slater likes this.
  4. BUQUICK

    BUQUICK I'm your huckleberry.

    I bought a few sets from Mark and when I get home I'll see if there is a non-A/C heater control woodgrain decal. All of my cars have A/C so I have no use for the non-A/C part if it is included in the set and would be happy to see it be of use to someone.
     
    Last edited: Jul 11, 2022
    Brett Slater and tdacton like this.
  5. gsgns4me

    gsgns4me Well-Known Member

    Thanks, Gary! I'd be glad to trade, if you are interested.

    I did do as Brett suggested and contacted Mark. I have one coming from him. I wouldn't mind having an extra non-A/C decal on hand in case my stupidity kicks into over-drive again though. Like you, I'm not likely to have a use for my extra A/C decal and would rather see it go to someone who might use it.
     
    ToddsGS and BUQUICK like this.
  6. BUQUICK

    BUQUICK I'm your huckleberry.

    Well I checked the sets I bought from Mark in 2021 and there is not an extra for non-A/C cars. It only contains the woodgrain for an A/C control.

    Good to read that Mark was able to provide what you needed.
     
  7. 2.5

    2.5 Platinum Level Contributor

    Can a complete set still be obtained from him?
     
    BUQUICK likes this.
  8. ajesh35

    ajesh35 Well-Known Member

    Yes he still seeking sets
     
    BUQUICK likes this.
  9. BUQUICK

    BUQUICK I'm your huckleberry.

  10. 2.5

    2.5 Platinum Level Contributor

    Thanks Gary, I don't need them now but it won't hurt to pick up a set for the future.
     
  11. BUQUICK

    BUQUICK I'm your huckleberry.


    Not a bad idea Scott. Gregg Setter offered very nice woodgrain for many years and many of us took for granted that it would always be available. Then when Greg stopped it made me realized I made a mistake by not buying more while I had the chance. Now that Mark W. has a really nice product on the market, I'm buying as many sets as I think I will ever need in the future.
     
  12. BYoung

    BYoung Stage me

    Todd is also selling Mark’s woodgrain decals.
     
    ToddsGS likes this.
  13. 2.5

    2.5 Platinum Level Contributor

    Gary, that is exactly what I am thinking. The only problem I see is that the adhesive on the sticker might go bad over time.
     
  14. ToddsGS

    ToddsGS Founders Club Member

Share This Page