MISC. 455 BUICK PARTS: Some Used OEM, NOS and New/Used Hi-Perf.Parts

455 BUICK PARTS: NOS WaterPump,Comp Cams "NOT High Energy" & non adjustable Pushrods

**Pics are displayed below**
These Parts are also listed on the forum in our "V8 Classified Ads and Auctions" section as follow's:


**SOLD** CRANKSHAFT - Better "N" Casting, OEM with Std. Rods/Mains 455 CRANKSHAFT, Ready to polish. ~ $150

available > NOS 455 GM Water Pump, New in Original GM Box, includes Gasket, and display's MADE IN USA on casting.
Fits:400/430/455 & A/C ~ $100

available >COMP CAMS 455 PUSHRODS, 9.375"
Do not have welded ball tip and ar non adjustable. Best Buick non adjustable Comp Cams Pushrods available at the time.
Purchased in 2004. BNIB - $25


**********************************************************************************************************
**SOLD** >7 qt. Deep Oil Pan - OEM style but made into 7qt. Sump for 455 etc. ~INCLUDES OIL PAN & PICKUP~ $130

**SOLD** >TIMING COVER for 455 in Exc.Condition (400/430/455) $150 >**SOLD**

**SOLD** >Dipstick Tube & attached Bracket off a 455 Excellent - $20 >**SOLD**

**SOLD** >TA 290-H Cam & Lifters: both are BNIB - $140 >**SOLD**

**SOLD** >NOS 455 GM Gasket Kit:
(GM Steel Head,intake rail & V/C gaskets in sealed cellophane bag, & Valley Pan) $150 >**SOLD**

**SOLD** >KENNE BELL 3/8" Non Adjustable Chrome Moly Pushrods for 455: 9.375" -BNIB $45 >**SOLD**

**SOLD** >KENNE BELL 455 +.030 Moly Street/Strip Piston Ring Set* -BNIB $40 >**SOLD**
(*made by Sealed Power for KB as per KB Buick Parts Catalog I have.)


Thank You v8Buick Forum!! :TU:


All prices + Shipping at dead cost (and I'll need to know if it's a business or residence address.)
FedEx,USPS or UPS Ground.. Whatever you decide or is the least cost.

Using PayPal is plus their net fees, or if you are sending a Money order or your own Check. I'll ship once money clears bank.

All Parts Located in Boca Raton, Florida.

Thank you for checking in advance, and a bigger Thanks to the Forum,and to those member's who have already purchased items. :3gears:

 

follow the rules and post prices and a location...

 

Sorry about that, as prices are posted in each Classified ad. I took care of it. Thanks!

 

Interested in cam and lifters

 

Great! shoot me a PM gent. Thanks :beer

 

put me in line for the timing cover and send me some pics please :TU:

 

As ad states, pics in classified section, but here's a link:
http://www.v8buick.com/vbclassified.php?do=ad&id=2478

You're first in line. PM me to start and whatever else you need gent.
Thanks :beers2:

 

put me in line for cam and lifters
Dave

 

Im sure it wont get to me but put me in line for cam and lifters

 

Interested in the Rollmaster timing chain.

 

x2 on the Rollmaster. Please identify part#.

 

No commitments or payments as yet.
Check your pms, and from last week when you were first looking for parts and before I listed them. I responded to you almost 1.5 weeks ago and never heard back from you at all.
Here is the ad, and all others are also listed in V8 Classifieds:
http://www.v8buick.com/vbclassified.php?do=ad&id=2474

I'll look for your PM contact if you're interested. Thanks gent.

 

I will list it (CS7030)
Also, Part number is in box pics at the ad.
http://www.v8buick.com/vbclassified.php?do=ad&id=2473
Thanks.

 

I haven't recv'd any PM from you. (See ad). http://www.v8buick.com/vbclassified.php?do=ad&id=2473
Still available until a member buys it. Thanks very much for your interest.

 

PM sent

 

I think you need to go back and read the rules in this thread:

http://www.v8buick.com/showthread.php?t=174760

Per the rules from that thread:

Work with the interested parties to complete the sale, in the order that they showed interest in your item. This interest must be shown with a public reply to your thread, Personal Messages (PM's) or emails are not acceptable communication requirements for "getting in line" to purchase an item. We suggest 48 hours as an acceptable time period to allow interested parties to contact you privately.

If the first user who responds to your ad does not complete the sale, you move onto the second person who responded, and so on and so forth down the list, until the item is sold. This list is dictated soley by the public replies to your ad.

You will not accept other offers or negotiate outside of these guidelines.

You will not refuse to sell the item to anyone, for any reason, unless a moderator or the board administrator is involved and Ok's the denial.


A "zero tolerance" policy is in place for users who fail to adhere to the guidelines, and approriate action will be taken. Investigation of such situations will be handled by me, the board owner and administrator. Click my username in the upper LH corner of this post to send me a PM regarding any such situation.

 

I am interested in the dipstick, how much to ship to 60096.Thanks Randy

 

Thank you for your interest Iceman.
I do now understand, and read Mike Bucy's thread on the subject that you fwd'd to my attention Ice. I just don't understand why some member's work thru the V8 Classified's and some do not. If you are interested in something, and I don't hear from you on the what, how, or why of the purchase, I'm not sure if you actually want it, or want to speak on it. So why not contact me? For instance, three member's expressed interest in my Cam/Lifter's, but only one has contacted me on it to find out details. I'm all for supporting the forum, and appreciate it to no end, but Ice why not get in touch with me to let me know what you mean by I'm interested in your item? Or contact me that you want to buy my item, when you decided to respond to it? Ok, so 48 Hours....

If you did not think so, I will adhere to Mike's posting moving forward. Again, I thank you for the police work.

 

I'll find out for you Monday Randy, and then let you know gent. Thank you.

 

Ill take the cam and lifters.If they are new in box.Thanks