1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

New 68-72 4 speed Shifter Knobs for consolette cars

Discussion in 'Parts for sale' started by copperheadgs1, Jan 6, 2016.

  1. copperheadgs1

    copperheadgs1 copperheadgs1

    Richie and Paul Masicotte you have moved up the list on pattern knobs. Yours and the three guys before you are ready to go. Ajesh was nice enough to move back in line so guys getting only one can get theirs. He will wait for next batch due soon.
     
  2. copperheadgs1

    copperheadgs1 copperheadgs1

    Sending messages to everyone.
     
    Brett Slater likes this.
  3. copperheadgs1

    copperheadgs1 copperheadgs1

    Everyone should have gotten a message. I am going to try and get out all of them this week. I am a pro box maker now. I need to hire that Dominoes Pizza box guy. Still waiting for second batch of pattern knobs. 5 I have went fast.
     
    ToddsGS likes this.
  4. copperheadgs1

    copperheadgs1 copperheadgs1

    3902C0CC-6B9E-44AC-A35E-823075758B27.jpeg B0517D11-FF23-4B37-B574-99BCBD92CA6A.jpeg Mass Boxing tonight. Pretty much everyone that responded is here ready to go after I get names off PayPal and money orders. Guys waiting for more shift pattern I appreciate your patience.
     
  5. copperheadgs1

    copperheadgs1 copperheadgs1

    59E13830-F873-44B0-9F22-DEDABE6212DC.jpeg I guess I would be negligent if I were to not post this. All I can suggest is don’t sand or grind on these in California. Everyone else breath easy.
     
    Stage 2 iron and Brett Slater like this.
  6. copperheadgs1

    copperheadgs1 copperheadgs1

    Ok, you Guys are shipped, Juan(Compta),
    Steve H.(2manybuicks), Todd Miller, Steve G(Packer Backer), Jim Lore, Paul Massicotte, Rich Johns, Nelson (Redmanf1) yours is ready to go but I have no shipping address for you. Richie pending.
     
  7. copperheadgs1

    copperheadgs1 copperheadgs1

    Buillac shipped also.
     
  8. copperheadgs1

    copperheadgs1 copperheadgs1

    Redmanf1 and Tdacton shipped today
     
    tdacton likes this.
  9. Vecch

    Vecch Well-Known Member

    Just seeing this, Dave. Do you have anymore without the shift pattern? If so, I'll take one.
     
  10. copperheadgs1

    copperheadgs1 copperheadgs1

    Yes I do. One left with a jam nut.
     
  11. copperheadgs1

    copperheadgs1 copperheadgs1

    Thanks
     
  12. copperheadgs1

    copperheadgs1 copperheadgs1

    Richie, TXGS, GS400 all shipped. In fact everyone paid up had shipped. I know Stage-2 Iron payment on the the way. Still waiting from responses from Dano, Rusty D, and Gregzy 71. You guys still want them? I know two of you guys wanted the pattern. Yours are waiting in the box. Let me know soon as other guys are waiting for the patterns. Either way I have more coming. ​
     
    TXGS likes this.
  13. copperheadgs1

    copperheadgs1 copperheadgs1

    Sent you a message.
     
  14. 2manybuicks

    2manybuicks Founders Club Member

    Got it. Sweet!

    All I need now is everything that goes under, above, and around it....
     
    Brett Slater likes this.
  15. copperheadgs1

    copperheadgs1 copperheadgs1

    Cool Steve.
     
  16. Richie

    Richie Well-Known Member

    Dave, I got mine today. Looks great. Thank you, Richie
     
    Brett Slater likes this.
  17. PackerBacker

    PackerBacker Blake's Dad

    My shift knobs arrived today and look great! Thanks for everything - installation planned for tomorrow x2
    THANKS!!!
    Steve
     
    Brett Slater likes this.
  18. Brett Slater

    Brett Slater Super Moderator Staff Member

    Make sure you post pictures.
     
  19. copperheadgs1

    copperheadgs1 copperheadgs1

    Nice
     
  20. copperheadgs1

    copperheadgs1 copperheadgs1

    Great, let us know how it works.
     

Share This Page