New product- Simple Solution

Discussion in 'Tri Shield Performance' started by Jim Weise, Jun 16, 2016.

  1. Jim Weise

    Jim Weise EFI/DIS 482

    The best way to hold your spark plug wires is with the factory type holders, nearly everyone agrees with that.

    With Stock steel valve covers, you just use the factory hardware and a set of the wire holders.. you can still get the 4 wire holder.

    Here is the example available from "help products" at the local parts joint..

    The issue has been when wanting to use this setup with cast Alum valve covers. The lower factory stud bolts really are not long enough.. I have gone thru all different kinds of solutions to that issue, all of them a major PITA..

    Then customer walks in with these.. so simple they are elegant.

    He made these up at work, just fooling around, for his motor.. it's an industrial grade electrical connector, with a 5/32 pin soldered into it, and then bent 90*.. with the right size hole for the valve cover bolt.

    We used them on his motor, made a slight design change, and then added a full set of Stainless valve cover bolts, and are now offering them for sale.

    You get the 4 stud mounts, 10 stainless bolts, and Priority mail shipping to the US for $24.00

    Add the above plastic wire holders and you have your looms setup for less than $30.

    I have used them a couple times now, been on and off with the covers on the dyno, endorse them, and am ready to offer them up to the community.

    I have 5 sets sitting here on my desk, ready to go.


    Paypal at jim@trishieldperformance .com
    or PM me with a CC number and the details.
    Or you can give me a call at the number below.

    Here they are..


  2. 69GS400s

    69GS400s own amusement ride!

    I'll take 2 sets .. paypal sent
  3. Jim Weise

    Jim Weise EFI/DIS 482

    Got it Alan, I will get a couple sets on the way.

    3 sets left now..

  4. Mike B in SC

    Mike B in SC Well-Known Member

    Paypal payment made for one set. Thanks Jim!
  5. justalark

    justalark Silver Level contributor

    Put me down for a set.
    PM sent.
  6. 69GS400s

    69GS400s own amusement ride!

    Thank you Sir. I can now put my other set of Edelbrock Alum. valve covers on Sportn'Wood to really piss people off in a couple of months :cool:
  7. Mike B in SC

    Mike B in SC Well-Known Member

    That is what I am putting on my 68 GS400! :TU:
  8. mygs462

    mygs462 Well-Known Member

    Are these all gone?
  9. 69GS400s

    69GS400s own amusement ride!

    Got them - Thanks Jim !

    .. wife called to tell me I received a package, asked what it was. I said "Must be your Anniversary Present, Sweetie ! - DONT OPEN IT !!" to which she replied,

    "You shopped for me at TriShield Performance ?? How romantic !!"

    :Dou::rolleyes::Do No:
  10. TheSilverBuick

    TheSilverBuick In the Middle of No Where

    :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh:
  11. Jim Weise

    Jim Weise EFI/DIS 482

    Yes guys, all sold out.. will talk to my guy to get more made.


    BADDABUICK Well-Known Member

    Jim put me down for a set
  13. Jim Weise

    Jim Weise EFI/DIS 482

    Will do Todd

  14. deluxe68

    deluxe68 Well-Known Member

    You can put me down for a set also. Thank you
    Will send PM

  15. Mike B in SC

    Mike B in SC Well-Known Member

    I got my set a few days ago. These are really nice and very well made! Thanks Jim! :TU:
  16. Jim Weise

    Jim Weise EFI/DIS 482

    Thank you Mike, there are more in the works.

  17. Gary Bohannon

    Gary Bohannon Well-Known Member

    I need a set.
    Have money in paypal, just got to figure how to foreward some to you.
  18. schmucko

    schmucko New Member

    Jim - I paypaled (verb?) last night. Let me know if you need anything else.

    thanks. .john
    1968 Jeepster Commando Convertible resto-mod
    Mike Phillips B-350, FI, Switch Pitch TH400. Getting close....
  19. Jim Weise

    Jim Weise EFI/DIS 482

    Yup, got your order, your on the list for them, once they come back in stock.

  20. HotRodRivi

    HotRodRivi Tomahawks sighted overseas

    Nothin like good ole fashion FRee market capitalism. Thanks for the great description and pic, I now have sets for sale 1/3 of the price of yours made in China .

    Nawwwwwwwww But really thanks I have made my own. Except for my terminal connector I use a high temp eye terminal, the rest is the same.

Share This Page