http://seattle.craigslist.org/kit/pts/653986388.html For sale is an inventory of parts I have amassed over the past 25 years, and now want to move out to clear the shelves and get these great parts into the hands of the growing BUICK 455 community. Priced to move out. Pick up, or I can meet in King/ Pierce / Kitsap County. I also ship cross country and world wide. I have a great reputation of providing high quality used BUICK 455 parts for many years. Not one dissatisfied client. Call Mark 206-793-7456 AA1: 455 Block, 1976, previous +.040" over, bores are beautiful! Block has been hot tank cleaned and magged ok.Needs a quick cleanup cross hatch hone and align bore. The best 455 BUICK block ever cast due to highest nickle content in the iron. This is a beautiful block and a perfect race block core, $380.00 AA2: 455 Heads, 1970 iron, hot tanked cleaned and mag tested ok. Cores only, never machined, ready for a good big valve and port polish job, the best BUICK heads ever cast lowest cc chambers, $225.00 AAA: 455 con rods w/ slightly used re-builder 4.350 (+.040) pistons, $170.00 BBB: 455 Con Rods, cleaned & mag-tested GOOD, $80.00 CCC: 455 slightly used re-builder 4.310 (std bore) Pistons $45.00 DDD: #1- 455 Crank Shaft, turned and polished, ready for install, $250.00 EEE: #1a- 455 Crank Shaft, turned and polished, ready for install, $250.00 FFF: 455 Block, 1971 TR Stamp, cleaned and mag-tested, std bore needs +.030" bore to clean up, $300.00 <--71 not a 72 GGG: TH-400 long shaft trans w/ converter, ran great, very low miles on rebuild,$200.00 HHH: 455 A/C Compressor w/ Brackets off full size 2 Electra, no hoses, worked, $45.00 III: 455 BUICK Timing Cover with oil pump. This has been cold tank cleaned, shows hardly a trace of wear on the oil pump area, some pitting in water pump area but no worries here. THis is a great hard to find part. $165.00 JJJ: 1970 BUICK 455 distributer, new MSD conversion, includes rotor, $185.00 KKK: MSD 6A Ignition Box, new in factory packaging, do not need, $150.00 III: BUICK 455 Oil Pan, very nice shape, painted correct BUICK red, $140.00 JJJ: BUICK 455 Oil Pan, dents pounded out, tank cleaned bare steel, $100.00 KKK: BUICK 455 Engine Bolts complete sets for an engine,misc. brackets, all tank cleaned and ready to use. Reply via e-mail for specific needs and prices. 001: Skylark GS Charcoal canister and bracket, good condition, $30.00 002: MSD tach adapter for use with MSD box and electronic distributor and aftermarket tach, $20.00 Not what you want if running an MSD box & Dist. 005: Fuel pump block off cover plate #1, chrome, $10.00, tasty. 007: 1972 Riviera front grill top chrome with clips, tasty, $5.00 008: Distributor pn #1112110 2L29 I think it is 72, $30.00 009: Distributor pn #1112077 OH31 This is a 1971, $40.00 010: Harmonic Balancer, no cracks in casting, somewhat dry rubber, good shape, $30.00 011: Harmonic Balancer, no cracks in casting, real good condition, $45.00 012: Flex Plate #1, mag tested, not cracks [sold] 013: Flex Plate #2, mag tested no cracks[listed on E-bay] 014: Push rod complete set #1,[sold] 015: Push rod complete set #2,[listed on E-bay] 026: Fan clutch unit, marked L6DA, good shape, $10.00 027: 1 pair steel rocker assy, cleaned,very good condition,[sold] 028: Good working starter with solenoid, not too old, #1, 10.00 029: Good working starter with solenoid, not too old, #2, 10.00 030: Standard tune up replacement distributor cap & wires barely used, likely only a couple hours, no coil wire, $10.00.
