Parting 65 Gran Sport

It has a 66 401 motor. 1/4's are no good. have some interest in the exhaust manifolds and center console. will waite a couple days and then they are up for grabs. Please post here if you have any needs from the car. I'll get it cleaned out and post pictures by the week end. Thanks, Tom

 

I found one that I had.

 

does this have red interior ? red kick panels with rug attached ? Gary

 

I need a tail panel (where the taillights are mounted) for a 65 convertible I am going to acquire this weekend. Let me know.

Thanks,

JB

 

To clarify - I need the "structural" panel that the taillights mount to.

JB

 

Hi,

How are the bumpers for rust? and how much?

If the manifolds are still available how much and what condition are they?

Engine plates and mounts?

Can you send me or post some pictures of the items

Would you be interested in selling the oil pan and sump (I really only need the sump)?

What type of Alt bracket set-up does it have looking for a non-AC parts (head bolts)

What is your zip?

Thanks
Jim

 

Hi Tom, I'm looking for the brackets that hold the front fender corners...
need to think on it for a while

 

Interested in console depending on condition.

Bob

 

2nd in line for the interior trim panels front and rear but only if it's for a post car.

I also am interested in the backglass moldings and vinyl top moldings that go from sail panel to sail panel.


Thanks,

brian

 

No seat belts or red interior. What ghrome carriage?

 

JB,I'll get you pictures this weekend.

 

Jim,it's a non A/C car and I'll get you pictures this weekens also. Brian it's a hard top.

 

Ted,let me know.Heres a couple not so good pics of the console and exhaust manifolds. Still waiting to here back on them.My zip is 44111 Cleveland,Ohio

 

I believe i'm 1st in line for the manifolds!

 

I am interested in the radiator top plate, steering column and battery tray assembly if they are available.

Please let me know approximate price and shipping to 06355.

Thanks

Brandon

 

Put me in line for the engine mounts/brackets as well.

Gary

 

I am also interested in the frame rear crossbrace (at rear bumper). Thanks !

JB

 

Tom,

I'm out as second in line for the interior trim but I'm still interested in the still in the backglass moldings and vinyl top moldings that go from sail panel to sail panel.

 

I need the headlight filler pieces that have 2 bolt holes and fill the gap between the bottom of the headlight and the top of the bumper.Can you give me a shipped price to banning,ca 92220

 

Hey guys,It started raining again today. I will get it apart and get pictures of all the parts you guys have asked about as soon as possible. Thanks,Tom