out of a 68 skylark sedan that had 35,100 original miles! i sold the distributor off it so i decided to part it out.... also sold: ht riser tube, upper hose, original htr hose one exhaust manifold is cracked where the exhaust pipe bolt goes through timing chain cover w/pump 85.00 68 rebuilt 2brl w/air cleaner 35.00 4 blade fan 10.00 non a/c pully setup w/power steering/brackets/hardware 75.00 good alternator ( i think it's original) 30.00 2brl intake 5.00 2brl heads 35.00/pr block w/crank (shortblock) 40.00 distributor holddown w/bolt 10.00 shippd power glide trans w/driveshaft 40.00 valve covers 15.00/pr w/hardware nice complete engine harness 50.00 good starter 15.00 thermostat housing 13.00 shipped going to scrap some of this stuff if it doesn't sell (heavy stuff)
Only one set of 350 heads in '68. The oiling will not be through the rods as in your '72, so the whole rocker assemly would need to be changed.
I may be interested in the pistons if you decide to tear it down that far. I need to see if my block will accept std size bore.
more pics of engine parts: timing chain cover w/pump 85.00 68 rebuilt 2brl w/air cleaner 35.00 4 blade fan SOLDSOLDSOLD non a/c pully setup w/power steering/brackets/hardware 75.00 good alternator ( i think it's original) 30.00 2brl intake 5.00 (scrapping soon) 2brl heads 35.00/pr block w/crank (shortblock) 40.00 distributor holddown w/bolt 10.00 shippd power glide trans w/driveshaft 40.00 valve covers 15.00/pr w/hardware nice complete engine harness 50.00 good starter 15.00 thermostat housing nice 16.00 shipped vally pan thing?/? 17.00 shipped intake bolts 10.00 shipped
Hi , do you still have the air breather hose intact ? (the one that runs from valve cover to air filter)
Any idea for the shipping to G6E 1B9 , Ste-Marie,Quebec,Canada If it is cracked on the valve cover end (grommet) I let pass , I still have my original one but it was crack at this place . Did 12$ shipped takes it (depend on the sh. price)
driver's side heat riser shield w/ex man bolts l/r 10.00 good starter w/shield and brackets 10.00 350 flexplate w/timing chain and gears for fuel pump 20.00 good motor mounts w/pushrod set and head bolt set 10.00 oil pan (slight dent on bottom) w/splash shield and pickup, dipstick w/tube but tube broke apart at the bulge 15.00/all block w/crank and cam 40.00 68 350 2 brl pistons/rods 25.00/set scrapping the exhaust mans and heads in a few days....
Hi , I found my old one . GM part # 1383965 (KF7) If you have a picture showing the end that goes in the valve cover to see the condition 15$ will be ok for me . ecritadonald@globetrotter.net Thank you for your time