Parting out 69 Skylark convertible (what's left of it)

2 weeks and whats left goes to crusher
350-4 + trans - motor won't turn over
Frame is good but sold pending cash - (if for any reason the frame does not
sell and you are interested say so now and you will be next in line, its gone in 2
weeks regardless)
Convertible top frame is good & has motor cyl hose's complete, front bow is solid.
Has 12 bolt rear housing
doors are solid driver-side bent windows & hrdwr in
frt fenders same
Anything you see & want I will give pricing for.
Dave

 

Where are you located? I need the square black plastic nuts that are used to secure headlite bezel, for per side. They are snap fit to the inner core. They are removed by pushing pin and removing. Also what is condition of front fender inners? thanks

 

Price on drivers side fender and shiping to 21788 zip

 

Interested in the passenger side inner fender if it is solid rust/rot free. Also interested in the radiator support if solid and no rot. Where are you located? Price?

Gary

South Bend, IN 46615

 

I'm located in Ontario Canada
Driver side Fender $150.00 shipping ?? 200 ?? look for firm$ if you really want it
Rad supports pretty tough rust and bent
Inner fenders $100.00 see pics
Not sure if black plastic supports are there get back to you on that

 

Pictures

 

ill pass on the drivers fender

 

Hi Dave,

Interested in front header bow. My original and the "extra" one I bought are both rusty in the same place, the driver's side near the alignment pin on the bottom where is meets the windshield frame. Will you check this area specifically and can you sell just he front header bow seperate? If so how much do you need and perhaps an idea on shipping 41048. My next step will probably be one of the reproduction front header bows, if necessary.

Thanks in advance!

 

How's that reverse light assembly? Looks okay in the picture.

 

Brian
I'll check the bow in the area your talking about
don't want to break it up now, I want $300 for the complete
unit
reverse lights good $15
shipping for both around $75

 

Hi I'm interested in the driver's fender but Ontario is a big province I'm in Toronto.

 

reverse light sold. total to 41048 please. thanks Dave.

 

Is that a right side tail light I see? If it is good, how much with shipping to 15522? Thanks.

 

How much for the horns if working and in good shape? Shipping to 61068? Thanks

 

Brian pulled the tack strip , you were correct here's what
I found. I'll get you a shiping cost when I get the light packed up.

Dave taillight is chipped let me know what you want to do.

Cars in Guelph Ontario

Dallas plastic plasic supports broken

 

Horns $15

 

If you decide to break up the convertible top, let me know. I need a couple things off it also!:TU:

 

"Dave taillight is chipped let me know what you want to do."

If you can post a pic of the lens and chipped area I would appreciate it.
Thanks Dave.

 

I might be interested in the Convertible top motor if you decide to break up the top. Let me know.

Thanks

 

Re: top parts
I'll break it up if its not gone by end of next week