1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

parting out 72 skylark GS clone convertible

Discussion in 'Parts for sale' started by painekiller, Sep 16, 2011.

  1. Topless64-455

    Topless64-455 Well-Known Member

    Great I will talk to Jamie from Fargo he said he would bring it back in his trailer. I will PM you his number and I can paypal you for it. I will call him in the morning. Thanks
     
  2. painekiller

    painekiller Well-Known Member

    i will need to know by tonight so i can get the parts to Dad. he is leaving wed. morning.
     
  3. bigblockbuick70

    bigblockbuick70 Gold Level Contributor

    OK, I will send a PM.
     
  4. Topless64-455

    Topless64-455 Well-Known Member

    Doug please have him take it.
     
  5. BIGJOE

    BIGJOE Well-Known Member

    I'm interested in the rear door panels but I really only need the top quarter panel that connects to the window. Will you take $40 shipped for little quarter door panel or $100 for them all.
    Thanks Joe
     
    Last edited: Oct 20, 2011
  6. rkovo216

    rkovo216 Well-Known Member

    N25 rerar bumper straight & solid it could be cleaned up and used on a driver $300

    ralley sport wheel complete, center cap is cracked $225

    Interested in rear bumper and sport wheel, also in Ohio near Cleveland let me know if you still have these items?
     
  7. uwasbuick

    uwasbuick NO, IT'S NOT A CHEVELLE!

    Doug, how much for the disc brake set-up? Does it include the proportioning valve? Thank you Josh
     
  8. rkovo216

    rkovo216 Well-Known Member

     
  9. bigblockbuick70

    bigblockbuick70 Gold Level Contributor

    Hi Doug, did you get my PM?
     
  10. painekiller

    painekiller Well-Known Member

    i checked usps and it looks like $76 for shipping
     
  11. Redmanf1

    Redmanf1 Gold Level Contributor

    Still waiting for shipping cost on these items.

    over flow tank
    rocker moldings
    windshield moldings
    pinch weld moldings
     
  12. painekiller

    painekiller Well-Known Member

    i know ive been busy and havent gotten the stuff together. i will get you a quote this week.
     
  13. bigblockbuick70

    bigblockbuick70 Gold Level Contributor

    OK, I sum up to a total of $151.
    Let me know how to pay. :TU:
     
  14. 71stick

    71stick Well-Known Member

    pm sent
     
  15. painekiller

    painekiller Well-Known Member

    that is correct. paypal is dwpaine@sbcglobal.net
     
  16. painekiller

    painekiller Well-Known Member

    yes its still available
     
  17. bigblockbuick70

    bigblockbuick70 Gold Level Contributor

    Money is sent. Please send me the USPS shipping number when avaliable. Thanks, Christian
     
  18. painekiller

    painekiller Well-Known Member

    got it i am planning on shipping tomorrow.
     
  19. 71stick

    71stick Well-Known Member

    how much shipped to ny long island
     
  20. allioop108

    allioop108 Well-Known Member

    I'm interested in the screws/fasteners that attch the overflow tank to the fender/wheelwell if they are not going with the overflow tank. Also interested in the "U" shape clips that the screws for the glovebox door screw into, they clip onto the dash then the screws for the glovebox door go into the door and then into the clips. Also the "U" shape clips for the radio bezel.

    Allen
     

Share This Page