Parting running/driving 1970 Skylark Post Coupe

Discussion in 'Car Part-Outs' started by BrianTrick, Aug 3, 2022.

  1. BrianTrick

    BrianTrick Brian Trick

    I should have a good top plate. Are you particular if it a 70,71,or 72? The later ones have more holes punched into them.
     
  2. BrianTrick

    BrianTrick Brian Trick

    BUQUICK,
    I need to make sure I have 3 of them for my 3 cars. I should be able to come up with a spare. I also have two more 70’s that I will part in a few months.
     
  3. BrianTrick

    BrianTrick Brian Trick

    March 9th/70. Two months before the car was built.
     

    Attached Files:

  4. BrianTrick

    BrianTrick Brian Trick

    Buickwagon,
    Parts are packaged and ready to ship.
     

    Attached Files:

  5. BrianTrick

    BrianTrick Brian Trick

    Peak reveal trim is removed. The stainless trim is perfect. No dings,dents,or scratches. However,not all of the fasteners survived. There are 8 of the metal push-in clips and 11 of the plastic clips that slide over the stud. Price is $110.00 for all of it WITH the shipping,anywhere in the US48.
     

    Attached Files:

  6. donny1973

    donny1973 Well-Known Member

    Brian,

    Trunk drops available?
     
  7. BrianTrick

    BrianTrick Brian Trick

    Donny,
    Not from this car. Saving the entire rear clip and floors in one piece.
     
  8. BrianTrick

    BrianTrick Brian Trick

    Grille is SOLD
     
  9. pglade

    pglade Well-Known Member

    Brian - How are the door armrests?..really talking about the plastic bases...dried out? chalky?, etc?
    Thanks
     
  10. BrianTrick

    BrianTrick Brian Trick

    Patton,
    I have 4 that are this color. The ones from this car do not have the stainless strip. The other pair do. Not flawless,but still pretty nice. They have not gotten chalky or brittle. First set of pictures is the pair with the stainless strip.
     

    Attached Files:

  11. BrianTrick

    BrianTrick Brian Trick

    Here is the pair of arm rests from this car:
     

    Attached Files:

  12. 70X258

    70X258 Well-Known Member

    Do you have the horns and do they work ?
     
  13. BrianTrick

    BrianTrick Brian Trick

    I have these horns and a few other pairs as well. I can test them.
     
  14. pglade

    pglade Well-Known Member

    Sorry - I found that I already had some lighter colored armrests packed away. Not the easiest thing to find in nice condition....especially the lighter colors.
     
  15. 70X258

    70X258 Well-Known Member

    Thank you
     
  16. freakzilla

    freakzilla Well-Known Member

    You in Indiana? Front and rear bumpers?
     
  17. BrianTrick

    BrianTrick Brian Trick

    Bumper cores are $250.00 each and shipping is almost as much.
     
  18. BrianTrick

    BrianTrick Brian Trick

    Update: I am considering selling this body. It is one of the nicest bodies you will find,as far as rust goes. It’s clean. However,the roof is damaged from a tree. I have a new roof skin and braces to repair it,and I also have a perfect roof from a donor car,if you wanted to go that route. I hate to see this car get cut up,but if someone has a rotted car that needs everything,here it is. It won’t be cheap,but if you want GM metal,here it is.
     
  19. 436'd Skylark

    436'd Skylark Sweet Fancy Moses!!!!!

    Probably long gone, but I'm looking for AC heat controls..
     
  20. BrianTrick

    BrianTrick Brian Trick

    I might have a set of AC controls from another one. I will look.
     

Share This Page