Picked up a 1962 Lesabre need coil springs

The factory dual system has two resonators under the front floor pans, with a dual in/out transverse muffler between the rear axle and truck. I'd just install pipe in place of the resonators, unless you want it to be REALLY quiet.

 

they worked great! shipping was not alot, i think it was about 300 or 400 clams with shipping.
took about 3 weeks to arrive. I got a set that was 1'' lower than stock.

---------- Post added at 04:37 PM ---------- Previous post was at 04:34 PM ----------

thanks andy thats what we are going to do.

I got this set from classic exhaust its ok but the right side hits the frame so we will need to heat it up and bend it a bit.

I wont be using these guys again you get what you pay for

 

we have carpet

 

Looks great! Where did you get the carpet from? My original stuff needs to be replaced.

 

Very Nice !!

 

Looks good, I'm with Andy, details please!

 

http://www.smsautofabrics.com/

theyre very good

 

SMS = the best. No doubt about it

 

They sent me samples of seat fabric for my '61. They were right on. If you don't mind my asking, how much did the carpet set you back?

 

Alot of people I know talk alot of trash about SMS. Especially regarding the time it takes to get anything from them. And the price of course.

I purchased vinyl seat material from them a while back for my fronts. They also did the heat set pleats for me. Yes, it took them a long time and yes it cost me an arm and a leg. But! the material was a drop dead match. They sent samples at no cost and even suprised me when they sent additional samples without me asking.

The guy I spoke to I believe was the owner, I don't remember his name. He was hard to get ahold of but when I did get him he was very helpfull.

Although alot of local people and upholstery shops curse the name (SMS), I would give them a thumbs up.

 

I assumed it was SMS. Definitely quality stuff.

 

it was about 250ish shipped only took about a week
gotta say awesome service, when i emailed them they ask me for my number and they called me!
the lady i spoke with was very nice i knew what she was talking about:TU:

 

That is excellent. I trust the fitment was good, no unusual problems? From the picture, it definitely loos like the salt and pepper original.

 

rear fit great had to use alittle extra padding on the front by the hump but other wise good to go

 

I noticed when I took mine out there was some thick-ass padding in the front. Did you put any of that back in or perhaps something similar?

 

yes sir we used more padding

 

she now is running stopping and drives nice, the power streeing and this car is sweet. here are some more pic's

---------- Post added at 08:04 PM ---------- Previous post was at 08:00 PM ----------

the roof got some love and the new dual master and booster work great, now she's getting some new camalot rose paint

 

Update: she is just about done, stainless all polished a ready to go back on , new carb, new booster and dual res, the interior oem seat material is on hand ready to ready for the seats, door panels being made at SMS and just clear coat needs to be applied. Now I can turn my attention back to my 55
https://www.dropbox.com/s/pwuh578dwdqctut/2014-03-20 20.11.15.jpg

 

Really nice progress and looks great!!