2 block girdles 1 iron 1 steel, both cut for 0-rings no sillycone required both Halo, iron $400 Steel $350 Lifter bore girdle new $200 SOLD Stefs dry sump oil pan $400 Titanium Stg1 intake valves nos $200 SOLD Lots of new & used Stanless valves up to 2.3" dia ask Used Pistons & Rods 8 Aries pistons 4.375 std comp height 1" pin with howards aluminum rods (rods only good for mock up,Pistons good) $200 10 JE 4.375 pistons .990 pin 1.350 comp height 9 GRP aluminum rods 7" 2.20 big end $650 10 JE 4.38 pistons .990 pin 1.350 comp height 8 GRP aluminum rods 7" 2.20 big end with set of new rings $650 4 Roller cams $375 ea 304R 108 272/272 .4 lobes 316-20R 108 275/279 .42/.43 lobes 320-22R 110 276/282 .405/.42 lobes 326R 109 286/298 .448/.436 Lobes pm me for info or pics Dave
Interested in the dry sump pan. Can I get pictures? How old is it? What compression ratio range are the JE pistons on those GRP rods?
Here you go seen a few wars but it's all there. Piston comp depends on stroke, chamber, deck etc but I ran them over 15:1 in my combo
Dave, I'm very interested in the NOS Stage 1 titanium valves. Are they cut for the Buick or Chevy style keepers? Thanks, Tom
I'll pass on the pistons and rods. Is the pan designed to be used with a TA block girdle and in an A Body? Does it really need 8 drain plugs? Is it hard to get it to not leak? Thanks
Tom valves are cut for chev keepers Pan will fit girdle, wont fit stock A-frame, there fastener access plugs not drains, don't worry about leaks if you need this pan you'll also need a diaper to catch the rest of the stuff that comes out. The only rods I have with 1" pin are the howards and there not great a good shop can open up the .990 rods for you . If your interested in buying please PM Me , first come first served Dave
Also going Fisher balancers 1 good 1 for parts, both $150 Sold can be seen on motor Enderle Birdcatcher on tunnel ram complete with pump and tuneup $1,850 Dave
On the valves do you pickup performance? What size are they? Putting a new set of stage1 heads together so it doesn't matter if cut for Chevy since I haven't bought springs and locks extra yet.