1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

Reintroducing the 364-401-425 Nailhead Timing Cover

Discussion in 'Products and Services' started by TABuickMike, Apr 22, 2014.

  1. TABuickMike

    TABuickMike Michael Tomaszewski Jr

    Hello everyone!

    I am please to announce that TA Performance has reintroduced our aluminum timing cover for 57-66, 364-401-425 Nailheads. Cast in the USA and machined in house by TA Performance to better than OE standards, these covers accept Early & Late Model Water Pumps. Front mounted neoprene seal included. Gaskets and distributor hold down are sold separately.


    Introductory Priced at $299! (Regular $350) - TAKING ORDERS NOW!!

    TA_1530B.jpg
     
  2. 66BulldogGS

    66BulldogGS Platinum Level Contributor

    Mike - I would just like to say thank you for continuing to provide parts for the Nailhead community!! This looks like a great piece.

    On a side note, I should be calling in the next few weeks to order a list of parts for my current build. Looking forward to doing business with you!
     
  3. DugsSin

    DugsSin Well-Known Member

    X's 2 what Johnny said and dang I've never seen one so pretty.
     
  4. GS Jim

    GS Jim Platinum Level Contributor

    Looks Great Mike. I'll probably be ordering One. I don't know if my Distributor will fit in the front tho. :TU:

    PONCH
     
  5. TA Perf

    TA Perf Member

    We just received castings, should start machining in a few weeks. Part number is TA1530B
     
  6. 300sbb_overkill

    300sbb_overkill WWG1WGA. MAGA


    Any chance for you guys at TA to make aluminum heads for a Nail Head engine and or an aluminum single 4bbl intake in the near future?
     
  7. TA Perf

    TA Perf Member

    We have been looking at a single 4 manifold for some time. It possible that may happen. No plans right now on a head.
     
  8. 300sbb_overkill

    300sbb_overkill WWG1WGA. MAGA

    That would be great if you guys made one of those,I have noticed that people have been very interested in an aluminum Nail Head single 4 bbl intake for years!:TU:(me being one of them)

    Yeah,making heads that flow decent with the factory configuration would be a difficult task to say the least,would be cool though!:eek2:


    Derek
     

Share This Page