1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

Searching for TA performance 4 Brrl intake Ta_1235

Discussion in 'Parts wanted' started by JStov, Sep 29, 2019.

  1. JStov

    JStov Well-Known Member

    if you have a used ta performance stage 1 intake manifold plz let me know I’m looking to replace my old cast iron one and give my back a break lol thanks
     
  2. partsrparts

    partsrparts Silver Level contributor

    I have been thinking about going to a SP3 and will part with my stage 1. Let me contact TA and see if they have 1 in stock and I will get back to you.
    Keith
     
  3. JStov

    JStov Well-Known Member

    Sounds good let me know, thanks
     
  4. partsrparts

    partsrparts Silver Level contributor

    Didn't get the chance to call TA today, will try tomorrow.
    Keith
     
  5. JStov

    JStov Well-Known Member

  6. partsrparts

    partsrparts Silver Level contributor

    I wish you would have told me you had another one lined up.
     
  7. JStov

    JStov Well-Known Member

    What??? I don’t nothing is definite, you haven’t let me know a solid so until I get a yes and a price I’m still looking, is that a issue?
     
  8. partsrparts

    partsrparts Silver Level contributor

    No, not at all, sorry
     
  9. JStov

    JStov Well-Known Member

    It’s ok, the other guy reached out but I haven’t made any definite’s yet, hopefully yours or his is within my budget with shipping. Have you spoke with summit yet?
     
  10. partsrparts

    partsrparts Silver Level contributor

    I ordered it from TA yesterday and they just have the raw casting and it needs to be machined, told me about 2wks. I'm going to run it at the track on the 19th of this month to get a base line for comparison to the SP3.
    New they want $465 plus shipping for the Stage 1, I'm thinking of selling it for $350 plus shipping. TA said around $40 to ship it to me in New Mexico and you are in Texas so shipping should be about the same.
    Keith
     
  11. JStov

    JStov Well-Known Member

    Well thanks but that’s a little out of the budget I planed for a used intake, I’ll just keep looking or just go ahead and grab a new one. Thanks again
     

Share This Page