Selling some of my stash parts after a cleaning up in my attic...

Discussion in 'Parts for sale' started by bignastyGS, Feb 1, 2010.

  1. bignastyGS

    bignastyGS Maggot pilot

    There will be more too...

    HEI distributor FITS 455 OR 350 WITH GEAR SWAP that has a brand new brass terminal cap and new unfired Summit coil.Set up to plug into an MSD 6AL, needs a new rotor as I didn't get one.
    Coil alone is 50 bucks and cap almost 20 bucks.
    $80 plus shipping to the US.
    [​IMG]

    HEI advance kit new from Summit $5 plus shipping
    [​IMG]

    MSD Firewall spark plug feed through new never installed..$15 shipped
    [​IMG]

    New MSD box isolators...$8 bucks shipped
    [​IMG]

    New Accel HEI cap boots part number 170045 $15 shipped.
    [​IMG]



    I also will be listing some other non needed items as I have to clear some space.Any offer or trades for parts will be considered..
     
  2. staged70

    staged70 RIP

    Pat room must be hard to find up there if these are in your way :)
     
  3. bignastyGS

    bignastyGS Maggot pilot

    John, This is just the beginning as I have been determined to not clutter up my new garage. I'll be listing 72 taillights,a 72 GS grille,4 dash pads as well as several dash clusters,a roll bar swing out and several other parts. I just started cleaning the attic and these were a few non needed items I stumbled onto.I would also like to sell some of the 350 motors I have later this spring as I only need 1 or 2 spare ones in case I puke the 73's. And transmissions...I think I have 12 TH350's alone.
     
  4. PHIL.V

    PHIL.V Well-Known Member

    How much for the 72 grill shipped to Illinois 61739?
     
  5. bignastyGS

    bignastyGS Maggot pilot

    I will be posting pics on Weds after 12 noon of the other parts I will be selling. I haven't decided on prices and you can check them out in Weds thread..
     
  6. PHIL.V

    PHIL.V Well-Known Member

    Ok, sounds good !! Thank you !
     
  7. Maintool-GS

    Maintool-GS Well-Known Member

    Hi, Pat ! Interested in, distributor & advance kit ! How much to ship to 15458 ? Thanks, Jeff
     
  8. bignastyGS

    bignastyGS Maggot pilot

    Jeff,
    I can get exact shipping costs(which I only charge) tomorrow. I am going to say about 7 bucks and if its more,I'll absorb the extra cost. Currently it has a 14 tooth gear on it and the number on the distributor is 1112803. I had this in my racecar and got a terrific deal on a Mallory Unilite is the only reason I didn't use it.


    Distributor is a 1974 unit.
     
  9. APVGS

    APVGS Ottawa Go Fast Guy!!

    Pat..I will take the deck screw just right of the HEI!!! Thanks!! :TU: Later,Tony.
     
  10. malzoo

    malzoo Member

    Ill take the distributor/cap/coil and the spring kit if Jeff doesnt.

    Darryl
     
  11. nick rabi

    nick rabi Well-Known Member

    Pat,
    Interseted in roll bar swingout.
     
  12. bignastyGS

    bignastyGS Maggot pilot

    Jeff,
    Shipping was 10 bucks,but I will meet you at 7 bucks 92 bucks total for the distributor and recurve set.Let me know.
    Pat
     
  13. GMB-GS1

    GMB-GS1 Silver Level contributor

    Will any of those dash pads you have happen to be black, fit a 70 and be for an a/c car?

    Thank you...Gary
     
  14. 70455ht

    70455ht Well-Known Member

    Interested in the advance kit. Shipping to 48375?
     
  15. RACEBUICKS

    RACEBUICKS Midwest Buick Mafia

    dash pad too will PM you
     

Share This Page