1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

SOLD! TH400 Stage 3 With SFI Bell Housing Built by Lonnie Diers.

Discussion in 'Parts for sale' started by Buickrat1, Jan 4, 2021.

Tags:
  1. Buickrat1

    Buickrat1 Well-Known Member

    I have a New Stage 3 TH400 with Chevy/BOP SFI Bell housing with all the Best parts. Trans Brake, Reverse manual Valve body Etc... Asking $2,800
     
  2. alaskagn

    alaskagn Well-Known Member

    Sending you a PM.
     
  3. Todd69GS

    Todd69GS Silver Level contributor

    Pm sent
     
  4. Buickrat1

    Buickrat1 Well-Known Member


    1. The EXtreme Automatics™ Stage 3 TH400 includes: http://extremeautomatics.com/productdetail. If you have any question please feel free to call me (602) 751-1139 Thanks Dave.

      EA Billet Pro Transbrake
      Reid Roller Tailhousing
      EA Billet SFI Bellhousing Adapter
      Vasco Max® Input Shaft with Special Design Oversize spline
      Vasco Max® Main shaft
      7075 Aluminum/4340 Combo Forward Drum
      7075 Aluminum Direct Drum
      Pro Mod Intermediate Sprag (Super Sprag)
      4340 Hardened Stator Support
      Intermediate Snap Ring case Support
      4340 Billet Clutch Hub
      4340 Billet Direct Pressure Plate
      4340 Billet Forward Clutch Drive
      4340 Billet Intermediate Pressure Plate
      Special Design Pressure Regulator System Adjustable 150-250 psi
      Maximum Duty Clutch Packs
      Deep Pan Aluminum Pan
      Billet 7075 Aluminum Pump Hard Coated W/ Wear Plate


      The Trans was dyno tested by Extreme before shipping.
    [​IMG]
     
  5. Buickrat1

    Buickrat1 Well-Known Member

Share This Page