Stage 2 decal for hood scoop

Discussion in 'Parts for sale' started by GSFredsbuddy, May 13, 2022.

  1. GSFredsbuddy

    GSFredsbuddy So much to do so little time

    After numerous runs I believe we have this decal down to an exact match.

    Picture shows an original reproduction decal sent to me by 455Powered. The pair of decals on one are the repops.
    These are digital images on vinyl and then they are precision cut so no border will show when the decal is applied. They will come with application tape on the decal ready to go. I will be installing a set this weekend and will post the picture when they are on.

    $35.00 per set, N/C for shipping if you are ok with a regular envelope and postage stamp. If you prefer priority mail that will cost you IMG_0245.JPG additional.
     
  2. TheEternalDance

    TheEternalDance Well-Known Member

    In line for 3 sets! PM coming - they look awesome
     
  3. Stage 2 iron

    Stage 2 iron Platinum Level Contributor

    In line for two sets. Waiting to see what they look like installed.
     
  4. nickbuickgs

    nickbuickgs nickbuickgs

    One Set please
     
  5. bignastyGS

    bignastyGS Maggot pilot

    Do you by chance make other decals? I have a small project that I paid another person to make,but they took the money and ran..Unfortunately, No decals either..
     
  6. rus

    rus Well-Known Member

    In line for a set
     
  7. bill lagna

    bill lagna Well-Known Member

    Inline for 1 set
    Bill
     
  8. GSFredsbuddy

    GSFredsbuddy So much to do so little time

    Ok Gang here is the install pic. ​

    IMG_0247.JPG
    Something to keep in mind when installing these / the slope of the hood and the position of the decal. If you keep the decal in line with the hood / equal measurements parallel to the hood there is a slight angle to the decal. We tried to lower the decal in the rear but the look against the hood was not appealing to me. Personal preference will dictate the install .

    Technical info :
    These are digital Images.
    The decal is made out of 3751 Cast H.P. vinyl (material used to wrap cars) with air egress for a bubble free application.
    It is precision cut on a translucent background so you get only the STAGE 2 to show

    Sorry Bignasty but these were made by a good friend who only helped because he knows how bad my addiction to a BUICK is.
     
    mbryson and Doug Hoyle like this.
  9. Stage 2 iron

    Stage 2 iron Platinum Level Contributor

    P.m. sent
     
  10. breakinbuick11

    breakinbuick11 Platinum Level Contributor

    I’ll take a set. Sending a PM
     
  11. GSFredsbuddy

    GSFredsbuddy So much to do so little time

    First round of decals sent out. Still have a few left working on another run. Chain supply issues getting the application tape.
     
    breakinbuick11 likes this.
  12. TrunkMonkey

    TrunkMonkey Totally bananas

    I will take a set.

    Email inbound. :)

    You have a good friend!
     
    Stage 2 iron likes this.
  13. TrunkMonkey

    TrunkMonkey Totally bananas

    "Someone", got some repro decals from "someone", that had a friend who made a nice set of decals, and this "someone" is happy to have them. :)

    Thank you!
     
  14. GSFredsbuddy

    GSFredsbuddy So much to do so little time

    Still got a couple of sets left.
     
  15. Todd Borland

    Todd Borland Buicktodd

    I’ll take a set. Sending a PM
     
  16. BuickGSrules

    BuickGSrules Gold Level Contributor

    I will take a set too. Sending PM.
     
  17. SoldierOfTheLaw

    SoldierOfTheLaw Well-Known Member

    If you have any left I'll buy a set also. Sending PM
     
  18. GSFredsbuddy

    GSFredsbuddy So much to do so little time

    PM's sent
     
  19. STAGE III

    STAGE III Lost Experimental 455-4 Bolt Main Block.

    Are these similar to the ones Tom Rix made? Thanks
     
  20. GSFredsbuddy

    GSFredsbuddy So much to do so little time

    They are as close as it gets to a reproduction of Tom's decals. I think the red might be off slightly from what he used but extremely hard to tell. I was fortunate enough to have a member here send me a set to work off of.
     

Share This Page