Hi All, my switchpitch only comes in at wide open throttle in second gear...you can here the engine rev out. All switches are factory and working properly. The idle switch is set to deliver high stall signal at idle but I can't hear any clicking when the throttle is moved. The vacuum line to the transmission is clear and carb vacuum is good. Was there a modification that got rid of the switching at idle? Thanks Ian
Ian, There is a switch up near the firewall that controls the stall at idle. It may be bad or misadjusted. Are you determined to use the stock switches? There are easier ways to control the switchpitch. If I didn't have my Poston timer box, I would simply install a momentary on, pushbutton type switch(like a line lock switch), and attach it to the shifter. Push the button when you want high stall, then let it go when you want low stall.