TA products

Discussion in 'Products and Services' started by partsrparts, Mar 11, 2021.

  1. partsrparts

    partsrparts Silver Level contributor

    I just want to give Mike sr, Mike jr, Tim and everyone else at TA a big thank you for your products and help through this build. I purchased the 350 alum. heads with level 1 porting, 212hr cam and the SP3 intake and installed into a 68 350 with 10:1 pistons at zero deck, TH400, 3:23 posi in a 76 Skylark.
    This thing ROCKS!!
    Keith
     
    72gs4spd, Gold GS and Dano like this.
  2. dr

    dr Well-Known Member

    That is great to hear. I put a down payment on some heads and plan to go 11:1. Do you have a video of the car/music of it idling?
     
    72gs4spd likes this.
  3. partsrparts

    partsrparts Silver Level contributor

  4. 72gs4spd

    72gs4spd Well-Known Member

    Could you post the cam specs? I have 289-84 RH cam from TA and curious of your specs. Should be in the car and running by summer.
     
  5. partsrparts

    partsrparts Silver Level contributor

    It's not a big cam, I wanted the low end torque. This cam works well with the JW converter and the SP3. I just need to get traction! camcard.JPG
     
    Gold GS and 72gs4spd like this.
  6. 72gs4spd

    72gs4spd Well-Known Member

    Thanks for posting. I’m actually building a 350 very similar to Mike Jr. I have a thread here with full details as it progresses. Glad to see people posting results.
     
    partsrparts likes this.

Share This Page