Rebuilding '70 GS Skylark...was a 350 automatic, now converting to 455 w/ M-20 4-sp.Will be using 800cfm quadrajet. Anyone know where I can find a throttle body linkage? Thank you, Carey
The first thing you ave to change is the bracket that goes on the intake,350 is too short for the BBB,then worry about the linkage.Bruno.
Since I am new to this restoration business, what I need is all the parts that will link the accelerator to the carburetor. I know enough to be dangerous, so I have people that will assist me with the restoration. Thank you for your help
Larry, thank you for the link to taperformance. Appreciate the input. I am sure I will be back asking for more input from you guys that have the knowledge. Carey
The only other thing you would need is the throttle cable bracket (if running a Q-jet). Mike Garrison sells those. http://www.mrbuick.com/reproductionparts.html Scroll down to the bottom of the page.