Trunk Lid Filler Panel

Hi Guys,

Forgive my ingnorance, but with all the talk of desired sheet metal for 70-72 GS/Skylarks, would a Trunk Lid Filler Panel from a 70-72 Chevelle fit the Buick?

I don't need one, but it seems to be a wanted item by many on this forum.

Just wondering

Cheers
Randy

 

Randy, It does not have the same contour around the back of the window. If you use a chevelle filler panel you would also have to use a chevelle rear window. The two are completley diffrent. :beer

 

HI Phil,

Thanks for the clairification.

Cheers
Randy

 

I have 4-5 of these for sale but noone wants to deal with me.They include the upper piece as well as lower piece plus the trunk arms.I'll hold on to them since they will someday be desirable...
Pat

 

Gee, I must have missed that sale! :sleep:
Put one aside for me Pat. I believe I'm going to need one for my '72.
I'm just starting to dig into this one but I'll know shortly.
Is it spring yet?????????

 

And which arm and leg will it take toget a good one?

 

I'll get pics if needed

Duane sold several for $250 which was the upper section,the lower pan section and the trunk arms too but they are too big to ship for a decent price.I will consider cutting them down and working a deal out..I had a member tell me I wanted too much for these,BUT if you ever cut oneof these out totally,you know I worked hard to get it out.

Bill,I have an excellent one that you will be interested in if needed..

 

Send me a picture @ Thundervallies@Direcway.com. Lower pan section?

 

ok a couple questions...Does your car have a vinly top and what year? 70 is different than 71-72 by the holes in the speaker shelf area...I can get pics probably tomorrow for you.

 

71 vynly top