1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

? vacuum choke pull off p/n for '69-'73 QJET

Discussion in 'The Venerable Q-Jet' started by Brian Albrecht, Sep 22, 2005.

  1. Brian Albrecht

    Brian Albrecht Classic Reflections

    Anyone have a clue as to a part number for a choke pull. My stock one is not getting it and my local NAPA didn't show anything in it's catalog that would work. :Do No:
     
  2. dcm422

    dcm422 Well-Known Member

    Advance Auto lists a p/n by GP Sorenson of 779030 for the choke pull off.
    Autozone list a p/n by Wells of #CP20
    The GM number (possibly obsolete) is 7038237
    These are all for the primary control that attaches to the secondary air valve on the qjet. Most are plastic. The secondary one is metal and only works on the choke setup.

    Hope this gives you something to go on,
    Mark
     
  3. flynbuick

    flynbuick Guest

    7038237 = vacuum break 70-72 455

    70 455 aux vacuum break = 7038732

    72 455 aux vacuum break = 7040328


    Brian

    The correct numbers are year and engine dependent.
     
  4. Brian Albrecht

    Brian Albrecht Classic Reflections

    Thank you Mark and Jim! :TU:
     
  5. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

Share This Page