What years would a 67 GS (FoMoCo) 3 speed Trans work for?

Friend has a 67 GS 3 speed tranny, shifter and yoke he wants to sell, are there any other years this tranny would work for / be correct for? I think it was a FoMoCo tranny that year? Is this tranny correct only for the 500 or so 3 speed cars sold in 67?

Thanks in advance for any help!

 

Chris,i beleive they were used in 65-67`s maybe 68 but im not sure,whats he looking to get for it?


Thanks

 

I think the same trans was used for the 3-speed manual GTOs as well.

 

Maybe 442`s as well but not Chevelles i dont think.


Thanks

 

Is that the Ford "3.03" manual gearbox? Didn't know GM used it. Good tranny...

 

I have a 3spd in my mustang, but its going to be heading out in the near future for the t5 I just bought. The 3spd has taken alot of abuse i must say, especially since it was originally behind a 6cyl and now its behind my 302.

 

If that's the same 3.03 gearbox, it's pretty stout - Ford put them in Broncos, pickups, as well as Mustangs.

$110 will get you a master rebuild kit, and it's an easy rebuild. :TU:

 

Yup. I purchased one of these for my '65 Skylark-Nail. 1st gear ratio seems to be around 2.50.
http://v8buick.com/showthread.php?t=102294
It should fit any GM that has the bellhousing drilled for the front of the Ford Tranny. The input shaft and bearing retainer sizes are identical to GM's.
Holidays :beer

 

The 3.03 trannys come up for sale pretty regularly over at the www.fordsix.com and www.tffn.net forums.

 

Meaning that GM had Ford modify the input side FoMoCo 3 speeds to fit the back of GM engines. Provided you have the correct dual bolt pattern bellhousing.

-A