Will ‘66 fenders fit a ‘67 GS

Discussion in 'Color is everything!' started by 94IDI, Aug 11, 2020.

  1. 94IDI

    94IDI Jared

    Title says it all... I’ve got a ‘67 GS and found a good deal on some ‘66 fenders. Is it a direct bolt on transfer?

    thanks in advance,

    BUQUICK I'm your huckleberry.

  3. nekkidhillbilly

    nekkidhillbilly post whore

    only difference is the trim but you will have a hole in a 66 one if its not a special for the vents as a 67 doesnt have that. you could put a patch panel in it though.
  4. 94IDI

    94IDI Jared

    That's the info I was looking for! Thanks fellas. And Gary, I don't know how I missed that old thread, but I appreciate you for setting me straight!
  5. wkillgs

    wkillgs Gold Level Contributor

    The inner structure connecting the outer fender to the core support is different..... the 67 has some cutouts in it, the 66 is solid. At the minimum, the bolt hole location is different. I haven't determined if there are dimension differences yet. I'll try to take a closer look this weekend.
  6. gsfred

    gsfred Founders Club Member

    The number of bolt holes in the front of the fender where it bolts to the rad support is different. If I remember correctly the 66 has 3 and the 67 4. Don't know if they match up.
  7. nekkidhillbilly

    nekkidhillbilly post whore

    i have a 67 on my car but i dont remember the outside is the same i do know that.

Share This Page